Samsung 5935NX Manual De Usuario

Faxing_ 63

•

:  Removes all digits of the selected entry.

•

Remove:  Removes the selected fax number entry.

•

Remove All:  Removes all the fax numbers in the input area.

•

Address:  Picks up the frequently used fax numbers directly from your 

machine or from SyncThru™ Web Service. (See "Setting up a fax phone 

book using SyncThru™ Web Service" on page 67.)

•

Duplex:  Selects whether the machine send faxes one side of the 

original, both sides of the original. 

•

Resolution:  Adjusts the resolution options.

•

Original Size:  Selects the size of the original document. Press OK to 

update current setting.

•

Delay Send:  Sets the machine to send a fax at a later time without your 

intervention. (See "Delaying a fax transmission" on page 64.)

•

Priority Send:  Sends an urgent fax before reserved operations. (See 

"Sending a priority fax" on page 65.)

•

Polling:  Used when the receiver requests the document to be faxed 

remotely at sender's absence or vice versa. In order to use the polling 

function, the originals must be previously stored in the machine. (See 

•

Mailbox:  Used to store a received fax or originals in the machine 

memory which are ready to be polled. You can use a mailbox on the 

same machine you are using, or the one on a remote machine. Each 

mailbox has a corresponding mailbox number, name and password. 

(See "Using mailbox" on page 68.)

•

Back:  Returns to the Basic tab.

•

Original Type:  Enhances the fax quality based on the type of the 

original document being scanned. (See "Original Type" on page 66.)

•

Darkness:  Adjusts the level of lightness or darkness of the fax. (See 

"Darkness" on page 66.)

•

Erase Background:  Reduces dark backgrounds or paper patterns as 

in newspaper originals. (See "Erase Background" on page 66.)

•

Color Mode:  Selects whether the user sends the fax in mono or color. 

•

Back:  Returns to the Basic tab.

This part explains how to send a fax and the special methods of 

transmission.

When you place the originals, you can use either the document feeder 

or the scanner glass. (See "Loading originals" on page 36.) If the 

originals are placed on both the document feeder and the scanner 

glass, the machine will read the originals on the document feeder first, 

which has higher priority in scanning.

In some countries, you are required by law to indicate your fax number on 

any fax you send. 
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter 

password and press OK. (See "Setting the authentication password" on 

3. Press the Setup tab > Fax Setup > Machine ID & Fax.
4. Touch the input area to enter the machine name and your fax number.
5. Press OK.