Samsung 5935NX Manual De Usuario

Faxing_ 66

To deactivate the Secure Receive feature, press Off. In this case, the 

received fax will be printed out.

Set this duplex feature to save paper. When the machine prints the received 

fax data, it prints them on both sides of the paper.
1. Press Machine Setup on the control panel. 
2. Select Admin Setting. When the login message pops up, then enter 

password and press OK. (See "Setting the authentication password" on 

page 33.)

3. Press the Setup tab > Fax Setup > Received Fax Printing > Duplex.

Select appropriate option.

•

Off:  Prints only one side of the paper.

•

Long Edge:  Prints both sides of the paper, however the binding will 

be the long edge.

•

Short Edge:  Prints both sides of the paper, however the binding will 

be the short edge.

4. Press OK.

Since your machine is a multi-tasking device, it can receive faxes while you 

are making copies or printing. If you receive a fax while you are copying or 

printing, your machine stores incoming faxes in its memory. Then, as soon 

as you finish copying or printing, the machine automatically prints the fax. 

Before sending a fax, you can adjust the document settings, such as 

resolution, darkness, color, duplex and so forth. Refer to explanation of this 

section.

The document setting herein is for only current job. If you want to 

change the default setting on document settings, refer to Admin 

Setting > the General tab > Default Settings. (See "General 

settings" on page 85.)

This function is especially intended for two-sided originals. You can select 

whether the machine sends the fax on one side or both sides of the paper. 
Load the originals onto the document feeder to use this function.
Press Fax > the Basic tab > Duplex. Use left/right arrows to toggle the 

value.

•

1 Sided:  Is for the originals that are printed on one side only.

•

2 Sided:  Is for the originals that are printed on both sides.

Changing the resolution setting affects the appearance of the received 

document. 
Press Fax > the Basic tab > Resolution. Use left/right arrows to toggle the 

value.

•

Standard:  Usually recommended for originals with text. This option will 

reduce the transmission time.

•

Fine:  Recommended for the originals containing with small characters, 

thin lines, or text that was printed using a dot-matrix machine. 

•

Super Fine:  Recommended for originals containing with extremely fine 

detail, this option is enabled only if the receiving machine also supports 

a Super Fine resolution.

For memory transmission, Super Fine mode is not available. The 

resolution setting is automatically changed to Fine.

You can set the original document type to enhance the quality of a 

document being scanned.
Press Fax > the Image tab > Original Type. Select the appropriate option 

on the screen and press OK.

•

Text:  For originals with text or line art.

•

Text/Photo:  For originals with both text and photographs together.

•

Photo:  For originals that are continuous tone photographs.

You can select the degree of darkness of the original document. 
Press Fax > the Image tab > Darkness. Press the right arrow to enhance 

the darkness degree and press OK.

You can lighten, reduce or delete the dark backgrounds from scanned 

colored paper or newspaper originals.
Press Fax > the Image tab > Erase Background. Press Erase to activate 

this function. Select Level and press OK.

Erase Background is disabled if the Original Type is set to Photo.

You can transmit a fax in color using this feature. But this feature only 

applies when you send a fax using On Hook Dial on the control panel.
Press Fax > the Image tab > Color Mode. Select option and OK.

•

Mono:  Transmits a fax in black and white.

•

Color:  Transmits a fax in color.

Color Mode faxes are only supported when faxes are sent manually. 

(See "Sending a fax manually" on page 64.) 

Use this feature to store destination names, fax numbers and transmission 

settings in your machine. There are two options, Individual and Group.

•

Individual:  Stores up to 200 fax numbers. And the fax numbers which 

are stored in Individual work as Speed Dial No..

•

Group:  Makes groups when you frequently send the same document to 

several destinations. You can store up to 100 group dial numbers. 

Entries stored here will be available for selection within the sending list 

on the Basic tab of Fax. Dialing Group can be also setup comprising of 

many Individual entries.

1. Press Fax > the Basic tab > Individual.

•

Edit:  Changes the ID, Speed Dial No., and Fax No..

•

New:  Creates the new Speed Dial No..

•

Delete:  Deletes the selected Speed Dial No..

•

Search:  Searches the fax number which currently stored in 

Individual phone book. When the keyboard pops up, enter ID.

•

Detail:  Shows ID, Fax No. and Included group information if it is 

grouped. (See "Storing individual fax numbers (Speed Dial No.)" on 

page 66.)

•

Apply:  Inputs the selected fax number to the sending fax number 

list in the Basic tab.

•

Cancel:  Cancels the current job and goes to the previous screen.