Samsung 5935NX Manual De Usuario

Scanning_ 79

disconnect the USB cable and reconnect it. If the problem 

continues,refer to the Image Capture’s help.

4. Set the scan options on this program.
5. Scan and save your scanned image.

•

For more information about using Image Capture, refer to the 

Image Capture’s help.

•

Use TWAIN-compliant softwares to apply more scan options.

•

You can also scan using TWAIN-compliant software, such as 

Adobe Photoshop.

•

If scanning does not operate in Image Capture, update Mac OS to 

the latest version. Image Capture operates properly in Mac OS X 

10.3.9 or higher and Mac OS X 10.4.7 or higher.

1. Make sure that the machine is connected to your computer and powered 

on.

2. Load originals face up into the document feeder , or place a single 

original face down on the scanner glass.
(See "Loading originals" on page 36.)

3. Start Applications and click Image Capture.
4. For Mac OS X 10.4 ~ 10.5

Click Devices and click Browse Devices.
For Mac OS X 10.6
Select your device below SHARED. Skip to step 7.

5. For Mac OS X 10.4:

Select your machine in Twain devices option. Make sure that Use 

TWAIN software checkbox is checked, and click Connect.

•

If a warning message appears, click Change Port.. to select port. 

•

If TWAIN UI appears, from the Preference tab, click Change Port.. 

to select port. 

Refer to Scan and Fax Manager for Change Port.. use. (See 

page 79.)

For Mac OS X 10.5:
Make sure that Connected checkbox is checked beside your machine in 

Bonjour Devices.
If you want to scan using TWAIN, refer to the Mac OS X10.4 steps 

above.

6. Set the scan options on this program.
7. Scan and save your scanned image.

•

For more information about using Image Capture,refer to the 

Image Capture’s help.

•

Use TWAIN-compliant softwares to apply more scan options. 

•

You can also scan using TWAIN-compliant softwares, such as 

Adobe Photoshop.

•

If scanning does not operate in Image Capture, update Mac OS to 

the latest version. Image Capture operates properly in Mac OS X 

10.3.9 or higher and Mac OS X 10.4.7 or higher.

To find out about Scan and Fax Manager program information, to check 

the installed scan driver's condition, to change scan settings. and to add 

or delete the folders where scanned documents to computer are saved 

in Scan and Fax Manager program, follow these instructions:

1. From the Smart Panel menu on Status bar, click Scan and Fax 

Manager. 

2. Select the appropriate machine from the Scan and Fax Manager .
3. Press Properties.
4. Use Set Scan Button to change the file destination or scan settings, 

to add or delete application programs, and to format files. You can 

change the scanning machine by using Change port. (Local or 

Network) 

5. When done, press OK.

You can scan a document using the Unified Driver Configurator window.

1. Double-click the Unified Driver Configurator on your desktop.
2. Click the 

 button to switch to Scanners Configuration.

3. Select the scanner on the list.

If you use only one machine device and it is connected to the computer 

and turned on, your scanner appears on the list and is automatically 

selected.
If you have two or more scanners connected to your computer, you can 

select any scanner to work at any time. For example, while acquisition is 

in progress on the first scanner, you may select the second scanner, set 

the device options and start the image acquisition simultaneously.

4. Click Properties.
5. Load originals face up into the document feeder, or place a single 

original face down on the scanner glass.
(See "Loading originals" on page 36.)

6. From the Scanner Properties window, click Preview.

The document is scanned and the image preview appears in the