Samsung 5935NX Manual De Usuario

Machine status and advanced feature_ 86

The sub-options available are Service Center 

Registration and Contact Info. You may enter 

information on service center and purchasing 

point.

You can set the date and time. (See "Setting the 

•

Default Window:  Set the first window that 

appears on the display screen after the 

machine wakes up from the Power Save 

mode. For example, if you select Fax as a 

default window, the first window will be the 

Basic tab of the Fax feature. If you want to 

show ID Copy as a default window, you need 

to enable this feature in Default Option.

•

Default Option:  Changes all the default 

values for copying, faxing, emailing, scanning 

and paper at once. (See "Changing the 

default settings" on page 34.)

•

Home:  Allows user to arrange each function 

in the display screen. 

Depending on the optional kit installed or 

the category selected, the selectable 

options on the display screen may differ.

This option lets you change the unit of (mm or 

inch) and set the numeric separation (comma or 

period).

The machine cancels a printing job if data is not 

received in specific time.

•

System Timeout:  The machine returns to 

the default value after waiting a certain 

length of time. 
You can set a time for maximum 10 minutes.

•

Held Job Timeout:  The machine holds a 

job for a specific time period.

Allows you to change the language that appears 

on the touch screen.

Reduce energy consumption by setting power 

saving features. (See "Using power saving 

Allows you to select the tray and paper for a 

printing job. Tray Confirmation Message 

activates the window asking whether you set the 

paper size and type for the tray that was just 

opened.

•

Auto Tray Switch:  With this option On and 

both tray1 and tray2 are filled with letter size 

paper, the machine automatically prints from 

tray2 after tray1 is empty. 

•

Auto Continue:  When the paper is 

mismatched, meaning that tray1 has filled 

with the letter size paper, but the printing job 

needs A4 size paper, the machine will wait 

for 30 seconds for paper in tray1 with proper 

sized paper. After 30 seconds, the machine 

automatically starts printing with letter-sized 

paper.

Print quality is affected by atmospheric pressure. 

The atmospheric pressure is determined by the 

height of the machine above sea level. This 

feature lets you adjust the altitude in a height 

district. The higher the altitude, the higher the 

adjustment, the highest being High 1. (See 

"Altitude adjustment" on page 33.)

This feature lets you to select the priority 

between copy jobs and print jobs.

•

Priority:  Set the priority by numbering the 

job. The machine starts from the least to the 

highest number in order.

•

First In, First Out:  The machine does an 

asked job in order.

You can adjust the noise level of the machine 

sound. Press Fault to adjust the machine's error 

sound. Select Conflict if you pressed the wrong 

option. Press Selection to have the machine 

make a sound whenever you press the selection 

from your touch screen.

The machine notifies you when to reorder toner 

cartridge and resets the used fuser counter, bias 

transfer roller, feed roller and document feeder 

friction pad counter.

You can test the machine by using the Image 

Quality Test Patterns and Loopback Test. 

You can set the machine to delete previous job 

information on HDD when you store new job 

information. To activate this feature, go to 

Admin Setting > the Setup tab > Optional 

Service. 
Set the On Demand Image Overwrite option to 

Enable. After activating this feature, you can 

overwrite an HDD by pressing Start in the 

display.