You can print the machine's information and job report.
1. Press Machine Setup on the control panel.
2. Press Machine Status > the Machine Info tab > Print/Report.
3. Select the report type, then the right side of the screen shows the list to

print.

4. Select the list to print.
5. Press Print.

•

If you want to print the machine's network information or font list,

press Machine Setup > Admin Setting > the Print/Report tab >

Report. If you select the Configuration Report, press Print to

print the report. The Fax Report, E-mail Confirmation Report,

and Scan to Server Confirmation options do not provide the

print, these are only for report setup.

•

You can use SyncThru™ Web Service to print the machine's

configuration or browse the status. Open the web browser in the

networked computer and type the machine's IP address. When

SyncThru™ Web Service opens, click Information > Print

Information.

MONITORING THE SUPPLIES LIFE

To view the supply life indicators, follow the steps below:
1. Press Machine Setup on the control panel.
2. Press Machine Status.
3. Check the used count of each supply item.

FINDING THE SERIAL NUMBER

To check your serial number from the screen, follow the steps below:
1. Press Machine Setup on the control panel.
2. Press Machine Status > the Machine Info tab > Machine Details.

CLEARING FAX MEMORY

You can erase fax memory. There are two ways to erasing fax memory,

follow the steps below:

If you are clearing fax memory without printing a fax job, you are

erasing it without checking the content. Be careful not to an erase

important document.

Clearing fax memory by printing a fax job

Print received fax job. Fax memory will automatically be erased.

Clearing fax memory without printing a fax job

From the Job Status > Current Job tab in the fax’s main LCD.

•

To erase all the jobs on the list, click Delete All.
This option erases all the jobs in the memory, be careful not to erase

jobs other than a fax job.

•

To erase only fax jobs on the list, select fax jobs with in the Job Type list

and click Delete.

SENDING THE TONER REORDER

NOTIFICATION

To set the machine to alert when the toner level is low and needs to be

reordered, do the following:
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter the

password and press OK.

3. Press the General tab > Supplies Management > Toner Cartridge

Reorder Notification.

4. Press Toner Reorder at Life Remaining and select a percentage.
5. Press OK.

CHECKING STORED DOCUMENTS

The machine shows the document list of the print or fax job.
Press Stored Documents on the main screen. If the screen displays
another menu, press (

) to go to the main screen.

•

Public tab: Shows the job list of delay print and store print job.

•

Secured tab: Shows the job list of secure print, secure receive, and

secure store print job.

•

User Name: Shows the user name who registered the job.

•

File Name: Shows the job name, which is registered as the job

information. For computer printing, the file name shows.

•

Date: Shows the date the job was registered.

•

Page: Shows the total page number of the job.

•

Detail: A separate message appears showing the basic job information

with file size, paper size and paper type.

•

Edit: Lets you modify the file name.

•

Delete: Deletes the selected list.