Samsung SCX3405FWXAC Manual De Usuario

•

Security is not configured correctly. Check the configured security on your 
access point and machine.

•

Your computer is not receiving a signal from your machine. Check the USB 
cable and your machine’s power.

•

Your machine is connected with a wired network cable. Remove the wired 
network cable from your machine.

•

The configured network address is unable to connect between your 
computer and machine.

-

For a DHCP network environment

The receives the IP address automatically (DHCP) when computer is 
configured to DHCP.

-

For a Static network environment

The machine uses the static address when the computer is configured 
to static address.

For example,

If the computer’s network information is as shown below:

▪

IP address: 169.254.133.42

▪

Subnet Mask: 255.255.0.0

Then the machine’s network information should be as below:

▪

IP address: 169.254.133.43

▪

Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)

▪

Gateway: 169.254.133.1

If problems occur while using the machine on a network, check the following: 

 

For information on the access point (or wireless router), refer to its own 
user's guide. 

 

•

Your computer, access point (or wireless router), or machine may not be 
turned on.

•

Check the wireless reception around the machine. If the router is far from 
the machine or there is an obstacle, you might have difficulty receiving the 
signal. 

•

Cycle the power for the access point (or wireless router), machine, and 
computer. Sometimes cycling the power can recover network 
communication.