Samsung 5100 Manual De Usuario

2.8

Getting started

1. Press ➛!or ❿ in standby mode.

The display shows the current ringer volume setting.  

2. Press ➛!or ❿!until you find the desired loudness. Four levels are

available; 0~3. 

You will hear the selected volume and the display will show the level.
Setting ‘0’ turns the ringer off. The machine will work normally even if
the ringer is set to off.

3. The change stores into memory and the machine returns to standby

mode.

to adjust the speaker volume. If you cannot hear dial

tone, check the phone line connection.

2. Press ➛!or ❿ repeatedly until you find the desired loudness. 

The display shows the current volume level.

3. The change stores into memory and the machine returns to standby

mode.

If you set the alarm volume menu ON, alarm tone sounds when an error
occurs. If you set the key volume menu ON, key tone sounds each time
any key is pressed.

and ➛ or ❿ until ‘VOLUME SETUP’ appears, then press

The display shows ‘ALARM VOLUME’.

Volume menu, press ➛ or ❿ until ‘KEY VOLUME’ appears, then
press 

3. Press ➛!or ❿ to turn the sound ON or OFF,  then press 

DIAL volume

ON

1)*Auto dial : OFF
2) Manual dial : ON

ON

OFF

KEY volume

*Auto dial : Broadcasting, Delay TX, Priority TX, Onetouch/Speed dial TX

03-Getting Started  12/10/99 6:19 AM  Page 9