Samsung CLX-6200 Manual De Usuario

Copying_ 39

The copy options, including darkness, original type, copy size, and number 

of copies, can be set to those most frequently used. When you copy a 

document, the default settings are used unless they have been changed by 

using the corresponding buttons on the control panel.
1. Press Copy.
2. Press Menu until Copy Setup appears on the bottom line of the display 

and press OK.

3. Press OK when Change Default appears.
4. Press the left/right arrow until the setup option you want appears and 

press OK.

5. Press the left/right arrow until the setting you want appears and press 

OK.

6. Repeat steps 4 through 5, as needed.
7. Press Stop/Clear to return to ready mode.

Your machine can print 2-sided originals on one sheet of A4-, Letter-, Legal-

, Folio-, Oficio-, Executive-, B5-, A5-, or A6-sized paper. 
When you copy using this feature, the machine prints one side of the 

original on the upper half of the paper and the other side on the lower half 

without reducing the size of the original. This feature is helpful for copying a 

small-sized item, such as a name card. 
This copy feature is available only when you place originals on the scanner 

glass.
1. Press ID Copy.
2. Place a single original face down on the scanner glass. 

For details about loading an original, see page 32.

3. Place Front Side and Press[Start] appears on the 

display.

4. Press Color Start or Black Start.

Your machine begins scanning the front side and 

shows Place Back Side and Press[Start]

5. Open the scanner lid and turn the original over.

6. Press Color Start to begin color copying. 

Or, press Black Start to begin black and white copying

You can use the following copy features:

You can set the machine to sort the copy job. For example, if you make 2 

copies of a 3 page original, one complete 3 page document will print 

followed by a second complete document.
1. Press Copy.
2. Load originals face up into the DADF (or ADF), or 

place a single original face down on the scanner glass.
For details about loading an original, see page 32.

3. Enter the number of copies using the number keypad.
4. Press Menu until Copy Feature appears on the 

bottom line of the display and press OK.

5. Press OK when Copy Collation appears.
6. Press the left/right arrow  to select the color mode you 

want.
There are two types of mode as following:
•

Yes-Color: Color copy

Yes-Mono: Black and White copy

7. Press OK to begin copying.

One complete document will print followed by the second complete 

document.

Your machine can print 2 or 4 original images reduced to fit onto one sheet 

of paper.
1. Press Copy.
2. Load originals face up into the DADF (or ADF), or 

place a single original face down on the scanner glass.
For details about loading an original, see page 32.

3. Press Menu until Copy Feature appears on the 

bottom line of the display and press OK.

4. Press the left/right arrow until 2-Up or 4-Up appears 

and press OK.

5. Press the left/right arrow  to select the color mode you 

want.
There are two types of mode as following:
•

Yes-Color: Color copy

Yes-Mono: Black and White copy

6. Press OK to begin copying.

While you are setting copy options, pressing Stop/Clear cancels the 

changed settings and restores the defaults.

If you press Stop/Clear or if no buttons are pressed for 

approximately 30 seconds, the machine cancels the copy job and 

returns to ready mode.

If the original is larger than the printable area, some portions may not 

be printed.

If you press Stop/Clear or if no buttons are pressed for approximately 

30 seconds, the machine cancels the copy job and returns to ready 

mode.

You cannot adjust the copy size using the Reduce/Enlarge button for 

making a 2- or 4-up copy.

1

2

1

2

3

4