Samsung CLX-6200 Manual De Usuario

52 _Faxing

7. Press Stop/Clear to return to ready mode.
When a fax is received in secure receiving mode, your machine stores it in 

memory and shows Secure Receive to let you know that there is a fax 

received.

1. Access the Secure Receive menu by following steps 1 through 3 in 

2. Press the left/right arrow until Print appears and press OK.
3. Enter the four-digit password and press OK. 

The machine prints all of the faxes stored in memory.

1. Access the Secure Receive menu by following steps 1 through 3 in 

2. Press the left/right arrow until Off appears and press OK.
3. Enter the four-digit password and press OK.

The mode is deactivated and the machine prints all faxes stored in 

memory.

4. Press Stop/Clear to return to ready mode.

Since your machine is a multi-tasking device, it can receive faxes while you 

are making copies or printing. If you receive a fax while you are copying or 

printing, your machine stores incoming faxes in its memory. Then, as soon 

as you finish copying or printing, the machine automatically prints the fax. 
Also, your machine receives faxes and stores them in its memory when 

there is no paper in the tray or no toner in the installed toner cartridge.

You can use the Multiple Send feature, which allows you to send a fax to 

multiple locations. Originals are automatically stored in memory and sent to 

a remote station. After transmission, the originals are automatically erased 

from memory. You cannot send a color fax using this feature.
1. Press Fax.
2. Load originals face up into the DADF (or ADF), or place a single original 

face down on the scanner glass.
For details about loading an original, see page 32.

3. Adjust the document resolution and darkness to suit your fax needs. See 

page 49.

4. Press Menu until Fax Feature appears on the bottom line of the display 

and press OK.

5. Press the left/right arrow until Multi Send appears and press OK.
6. Enter the number of the first receiving fax machine and press OK.

You can use speed buttons, speed dial numbers. You can enter Group 

Dial Number using Address Book Button. For details, see page 55.

7. Enter the second fax number and press OK.

The display asks you to enter another fax number to send the document.

8. To enter more fax numbers, press OK when Yes appears and repeat 

steps 6 and 7. You can add up to 10 destinations.

9. When you have finished entering fax numbers, press the left/right arrow 

to select No at the Another No.? prompt and press OK.
The original is scanned into memory before transmission. The display 

shows memory capacity and the number of pages being stored in 

memory.

10. If an original is placed on the scanner glass, select Yes to add another 

pages. Load another original and press OK.
When you have finished, select No at the Another Page? prompt.

The machine begins sending the fax to the numbers you entered in the 

order in which you entered them.

You can set your machine to send a fax at a later time when you will not be 

present. You cannot send a color fax using this feature.
1. Press Fax.
2. Load originals face up into the DADF (or ADF), or place a single original 

face down on the scanner glass.
For details about loading an original, see page 32.

3. Adjust the document resolution and darkness to suit your fax needs. See 

page 49.

4. Press Menu until Fax Feature appears on the bottom line of the display 

and press OK.

5. Press the left/right arrow until Delay Send appears and press OK.
6. Enter the number of the receiving machine using the number keypad.

You can use speed buttons, speed dial numbers. You can enter Group 

Dial Number using Address Book Button.For details, see page 55.

7. Press OK to confirm the number. The display asks you to enter another 

fax number to which to send the document.

8. To enter more fax numbers, press OK when Yes appears and repeat 

steps 6 and 7. You can add up to 10 destinations.

9. When you have finished entering fax numbers, press

 the 

left/right arrow 

to select No at the Another No.? prompt and press OK.

10. Enter the job name you want and press OK.

For details on how to enter alphanumeric characters, see page 29.

If you do not want to assign a name, skip this step.

11. Enter the time using the number keypad and press OK, or Black Start.

The original is scanned into memory before transmission. The display 

shows memory capacity and the number of pages being stored in 

memory.

12. If an original is placed on the scanner glass, select Yes to add another 

page. Load another original and press OK.
When you have finished, select No at the Another Page? prompt.

The machine returns to ready mode. The display reminds you that you 

are in ready mode and that a delayed fax is set.

You can add pages to the delayed transmissions previously reserved in 

your machine’s memory.
1. Load the originals to be added and adjust document settings.
2. Press Menu until Fax Feature appears on the bottom line of the 

display and press OK.

3. Press OK when Add Page appears.
4. Press the left/right arrow until the fax job you want appears and 

press OK.
The machine scans the original into memory and shows the total 

number of pages and the number of the added pages.

Once you entered a group dial number, you cannot enter another 

group dial numbers anymore.

Once you entered a group dial number, you cannot enter another 

group dial numbers anymore.

If you set a time earlier than the current time, the fax will be sent at 

that time on the following day.