Samsung CLX-6200 Manual De Usuario

Maintenance_ 63

To get the most from the toner cartridge, keep the following guidelines in 

mind:
•

Do not remove the toner cartridge from its package until ready for use. 

•

Do not refill the toner cartridge. The machine warranty does not cover 

damage caused by using a refilled cartridge.

•

Store toner cartridges in the same environment as your machine.

•

To prevent damage to the toner cartridge, do not expose it to light for 

more than a few minutes.

The life of the toner cartridge yield depends on the amount of toner that print 

jobs require. The actual number may also be different depending on the 

print density of the pages you print on, and the number of pages may be 

affected by operating environment, printing interval, media type, and media 

size. If you print a lot of graphics, you may need to change the cartridge 

more often.

When a toner is low, faded or light areas may appear. It is possible that 

colored images may be printed with incorrect colors due to flawed mixing of 

toner colors when one of the colored toner cartridges is low on toner. You 

can temporarily improve print quality by redistributing the toner.
•

The toner-related message saying that the toner is low may appear on 

the display.

•

The SmartPanel program window appears on the computer telling you 

which color cartridge is low on toner.

1. Using the handle, completely open the front cover.

2. Grasp the handles on the toner cartridge and pull to remove the 

cartridge from the machine.

3. Holding both handles on the toner cartridge, thoroughly rock it from side 

to side to evenly distribute the toner. 

•

Do not touch the green surface, the OPC drum or the front of the 

toner cartridge, with your hands or any other material. Use the 

handle on each cartridge in order to avoid touching this area.

•

Be careful not to scratch the surface of the paper transfer belt.

•

If you leave the front cover open for more than a few minutes, the 

OPC drum can be exposed to light. This will cause damage to the 

OPC drum. Close the front cover should the installation need to 

be halted for any reason.

When you open the front cover, be careful not to touch the 

underneath of the control panel (the lower part of the fuser unit). The 

temperature of the fuser unit might be high and could damage your 

skin.

When you open the front cover and work inside the machine, it is 

highly recommend that you remove the paper transfer belt first. 

Because the work you do could contaminate the paper transfer belt.

If toner gets on your clothing, wipe it off with a dry

cloth and wash it in cold water. Hot water sets toner into

fabric.