Samsung CLX-6200 Manual De Usuario

94 _Installing accessories

The numbers you can enter as follows:

7. When you have finished, press Stop/Clear to return to ready mode.

Installing the hard disk allows the data from your computer to be sent to the 

print queue of the printer hard disk. This decreases the workload of the 

computer. You can also use various print features, such as storing a job in 

the hard disk, proofing a job, and printing private documents.

For order information, see "Accessories" on page 89. Review the 

precautions on page 91.
1. Turn the machine off and unplug all cables from the machine.
2. Release the screws and remove the rear cover.

3. Open the control board cover. Release the screws, then lift up the cover 

slightly and pull the cover to the right. 

4. Align the connector on the hard disk with the connector on the control 

board. Push the hard disk in until it is latched into place

.

5. Fasten the screws supplied with your new hard disk.

6. Replace the control board cover and fasten the cover with the screws.

7. Replace the rear cover and fasten the cover with the screw.
8. Reconnect the power cord and printer cable, and turn the machine on.
9. Print a configuration page from the control panel to check if the hard disk 

is correctly installed. See page 60.

After installing the hard disk, you need to select it in the printer properties to 

enable its use. Take the following steps:
1. Click the Windows Start menu.
2. For Windows 2000, select Settings and then Printers.

For Windows XP/2003, select Printers and Faxes.

For Windows Vista, select Control Panel > Hardware and Sound > 

Printers.

64-bit WEP

10 digits

5 characters

128-bit WEP

26 digits

13 characters