Samsung CLX-6250 Manual De Usuario

Troubleshooting_ 1

1.

troubleshooting

This chapter gives helpful information for what to do if you encounter an error.

•

•

•

•

•

•

  

When the toner cartridge is near the end of its life:

•

White streaks or light printing occurs. 

•

The toner-related message saying that the toner is low may appear on 

the display.

•

The Status LED blinks red. 

If this happens, you can temporarily improve print quality by redistributing 

the remaining toner in the cartridge. In some cases, white streaks or light 

printing will still occur even after you have redistributed the toner.
1. Using the handle, completely open the front door.

2. Grasp the handles on the toner cartridge and pull the cartridge out.

If you open the front door, be careful not to touch the underneath 

the control panel (the lower part of the fuser unit). The temperature 

of the fuser unit might be extremely hot and could damage your 

skin. 

When you open the front door and work inside the machine, it is 

highly recommend that you remove the paper transfer belt first. 

Because the work you do could contaminate the paper transfer 

belt.

3. Holding both handles on the toner cartridge, thoroughly rock it from side 

to side to redistribute the toner.

If toner gets on your clothing, wipe it off with a dry cloth and wash 

clothing in cold water. Hot water sets toner into fabric.

4. Hold the toner cartridge by the handle and slowly insert the cartridge into 

the opening in the machine. 
Tabs on the sides of the cartridge and corresponding grooves within the 

machine will guide the cartridge into the correct position until it locks into