Samsung CLX-6250 Manual De Usuario

Troubleshooting_ 10

There is no paper in the 

tray.

Load paper in the tray 

the tray" on page 3).

Paper has jammed 

during duplex printing.

Clear the jam (See "In 

page 7).

Paper has jammed in exit 

area.

Clear the jam (See "In 

exit area" on page 5).

Paper has jammed 

inside the machine.

Clear the jam (See 

page 4).

Paper has jammed 

during duplex printing.

Clear the jam (See "In 

page 7).

Paper has jammed 

during duplex printing.

Clear the jam (See "In 

page 7).

The machine has 

received a fax from 

which is registered as a 

junk fax.

The received fax data 

will be deleted. 

Reconfirm junk fax 

on page 1).

The receiving fax 

machine did not answer 

or the line is already 

engaged.

Try again after a few 

minutes.

Your machine cannot 

connect with the 

receiving fax machine or 

has lost contact because 

of a problem with the 

phone line.

Try again. If the problem 

persists, wait an hour or 

so for the line to clear 

again. Or, turn the ECM 

mode on (See 

There is a problem in the 

machine.

Turn the machine off 

and turn it on again. If 

the problem persists, 

call for service.

The memory is full.

Press the left/right 

arrow to highlight 

Cancel or Start, then 

press OK. If you select 

Cancel , the machine 

stops the fax job. If you 

select Start, the 

machine only sends 

scanned documents of 

the fax job. 

The memory is full.

Split the transmission 

into more than one 

operation.

The memory is full.

Print or remove the 

received fax data in the 

memory.

There is a problem in the 

machine.

Turn the machine off 

and turn it on again. If 

the problem persists, 

call for service.

There is a problem with 

the network.

Check the network. If 

the problem persists, 

ask the system 

administrator or the 

person who has set up 

your local network.

The remote fax machine 

has not answered after 

several redial attempts.

Try again. Verify the 

number to ensure that a 

fax can be received.

The machine is in a room 

with improper room 

temperature.

Move the machine to a 

room with proper room 

temperature (See 

You are performing an 

Add Pages or Cancel 

Job operation, but there 

are no jobs waiting.

Check the display to 

see if there are any 

scheduled jobs. The 

display should indicate 

if any scheduled jobs 

are in Standby mode, 

for example, Delay Fax.

The machine is not 

connected with a 

network cable.

Connect the machine to 

the network with a 

network cable.

There is a problem on 

the network interface.

Turn the power switch 

off and on. If the 

problem persists, call 

for service.

The load original has 

jammed in the document 

feeder.

Clear the jam (See 

The original is too long 

for scanner.

Check the originals
(See "Preparing 

originals" on page 1).

The document output 

tray is full.

The document output 

tray can hold up to 160 

sheets of plain paper. 

Once the paper is 

removed from the
document output tray, 

the printer resumes 

printing.

Paper has jammed in the 

multi-purpose tray area.

Clear the jam (See "In 

Paper has jammed in the 

tray1 area.

Clear the jam (See "In 

Paper has jammed in the 

tray2 area.

Clear the jam (See "In