Samsung CLX-6250 Manual De Usuario

•

Plug in the power cord and then press the power 

switch to turn the machine on. 

Or press 

 (power) on the control panel.

•

Disconnect the machine printer cable and 

reconnect it.

-

-

For Network Printing 

Troubleshooting_ 13

Clear the paper jam (See "Clearing paper jams" 

on page 3).

•

Check the maximum paper capacity of the 

tray (See "Print media specifications" on 

•

Make sure that you are using the correct type 

of paper (See "Print media specifications" on 

•

Remove paper from the tray and flex or fan 

the paper.

•

Humid conditions may cause some paper to 

stick together, install paper from a fresh ream.

Different types of paper may be stacked in the 

tray. Load paper of only one type, size, and 

weight.

•

Remove any obstructions from inside the 

machine.

•

Paper has not been loaded correctly. Remove 

paper from the tray and reload it correctly.

•

There is too much paper in the tray. Remove 

excess paper from the tray.

•

The paper is too thick. Use only paper that 

meets the specifications required by the 

machine (See "Print media specifications" on 

•

If an original does not feed into the machine, 

the document feeder rubber pad may require 

to be replaced. Contact a service 

representative.

•

There is too much paper in the tray. Remove 

excess paper from the tray. If you are printing 

on special materials, use the multi-purpose 

tray.

•

An incorrect type of paper is being used. Use 

only paper that meets the specifications 

required by the machine (See "Print media 

specifications" on page 3).

•

There may be debris inside the machine. 

Open the front door and remove any debris.

•

If an original does not feed into the machine, 

the document feeder rubber pad may need to 

be replaced. Contact a service representative.

Ensure that the paper guides are against both 

sides of the envelopes.