Samsung CLX-6250 Manual De Usuario

Administrator’s Guide (Windows only)_ 5

•

If you use Windows Vista, Windows 7 and Windows 2008 Server R2 

click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter which represents 

your CD-ROM drive and click OK.

•

If the AutoPlay window appears in Windows Vista, click Run 

Setup.exe in Install or run program field, and click Continue in the 

User Account Control windows.

•

If the AutoPlay window appears in Windows 7 and Windows 2008 

Server R2, click Run Setup.exe in Install or run program field, and 

click Yes in the User Account Control windows.

3. Select Administrator Installation > Create Customized Installer.

If necessary, select a language from the drop-down list.

4. Read License Agreement, and select I accept the terms of the 

License Agreement. Then, click Next.

5. Select Package Type window appears. 

Select Modify Script.
If you place the mouse cursor over the package type, you can see the 

detailed information on the bottom right side of the window. 

6. Open the script file you want to modify(ex:CONFIG.CI3). 

CONFIG.CI3 script file will exist in \Setup\Script subfolder of the 

created setup package.

7. Select Printer connection window appears. 

Select the printer connection type and click Next. 

•

If you selected Network Connection, Search Network Printers 

window appears, type in the IP address or host name in the 

information field than click Search. when you are finished, click 

Next. 

•

The discovered printer list will show network printers on the same 

subnet. If you want to specify a network printer that is located over 

subnet then specify IP address of network printer directly.

•

If you can’t search network printers on the network then check 

whether your firewall setting is disabled. If it is enabled, disable 

firewall temporarily and try searching again.

•

Setup configuration script filename is set as CONFIG.CI3 and it’s 

not changeable.

8. Set Printer Drivers window appears. Click Next. 

If necessary, configure printer name, sharing, shared name and default 

printer setting. If you changed settings then you should click Apply 

button to apply changes then click Next.

9. Summary window appears. Check the package information and click 

Next to start creating the setup package. 
You can modify the package configuration by clicking the Back button. 

10.  When creating the setup package is finished, Packaging Completed 

window appears.
Check Open package folder upon completion if you want the created 

package to open automatically after it’s created. 

11. Click Finish. 

Silent installation mode is an installation method that does not require any 

user intervention. Once you start the installation, the machine driver and 

software are automatically installed on you computer. You can start the 

silent installation by typing /s or /S in the command window. Silent 

installation can also be performed by using the command script file 

Following table shows commands that can be used in the command window 

or in making a script file (See "Creating a setup script file" on page 4).

Following command-line are effective and operated when command is 

used with /s or /S. But /h, /H or /? are exceptional commands that can 

be operated solely.

/s or
/S

Starts silent installation. 

Installs machine drivers 

without prompting any UIs 

or user intervention.

/p”<port 

name>” or
/P”<port 

name>”

Specifies printer port.

Network Port will be 

created by use of 

Standard TCP/IP Port 

monitor. For local port, 

this port must exist on 

system before being 

specified by 

command.

Printer port name can be 

specified as IP address, 

hostname, USB local port 

name or IEEE1284 port 

name.
For example

•

 /p”xxx.xxx.xxx.xxx” in 

where, “xxx.xxx.xxx.xxx” 

means IP address for 

network printer. 

/p”USB001”, /P”LPT1:”, 

/p”hostname”

•

When installing the 

driver silently in Korean, 

type in-Setup.exe /s 

/l”<Lang_cod

e>” or
/L”<Lang_co

de>”

Sets language code.

The default language 

will be decided 

automatically if there 

is no specified 

installation language 

commanded. The 

default language 

depends on your 

system locale 

information.

Decimal number and 

hexadecimal number can 

be used but hexadecimal 

number must have prefix 

with “0X”. Refer to 

Language Codes section for 

available <Lang_code>.
This command applies to all 

machine’s drivers and 

application software if 

specified language is 

supported. All software 

included in the machine’s 

drivers will be installed as 

the specified language.

•

Setup.exe /s /L"0x0012” 

or Setup.exe /s /L"18” ; 

install setup package 

silently with Korean.

/a”<dest_pat

h>” or
/A”<dest_pat

h>”

Specifies destination path 

for installation. 

The destination path 

should be a fully 

qualified path.

Since machine drivers 

should be installed on the 

OS specific location, this 

command applies to only 

application software.