Samsung CLX-6250 Manual De Usuario

Getting started_ 3

•

Intel 

Processors

•

PowerPC G4/ 

G5

•

128 MB for a 

PowerPC based 

Mac (512 MB)

•

512 MB for a 

Intel-based Mac 

(1 GB)

1 GB

•

Intel 

Processors

•

867 MHz or 

faster Power 

PC G4/ G5

512 MB (1 GB)

1 GB

•

Intel 

Processors

1 GB (2 GB)

1 GB

RedHat® Enterprise Linux WS 4, 5 (32/64 bit)
Fedora Core 2~10 (32/64 bit)
SuSE Linux 9.1 (32 bit)
OpenSuSE® 9.2, 9.3, 10.0, 10.1, 10.2, 10.3, 11.0, 

11.1 (32/64 bit) 
Mandrake 10.0, 10.1 (32/64 bit)
Mandriva 2005, 2006, 2007, 2008, 2009 (32/64 bit) 
Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10 (32/64 bit)
SuSE Linux Enterprise Desktop 9, 10 (32/64 bit)
Debian 3.1, 4.0, 5.0 (32/64 bit) 

Pentium IV 2.4 GHz (Intel Core™2)

512 MB (1024 MB)

1 GB (2 GB)

•

It is necessary to claim swap partition of 300 MB or larger for working 

with large scanned images.

•

The Linux scanner driver supports the optical resolution at maximum.

Sun Solaris / SPARC
Sun Solaris / x86
HP-UX / PA-RISC
HP-UX / Itanium
IBM AIX / Power

Up to 100 MB

A locally connected machine is a machine directly attached to your 

computer using the USB cable. If your machine is attached to a network, 

skip the following steps below and go on to installing network connected 

machine’s driver (See "Installing network connected machine’s driver" on 

page 3).

Only use an USB cable no longer then 3 m (10 ft. ).

You can install the machine software using the typical or custom method.
The following steps below are recommended for most users who use a 

machine directly connected to your computer. All components necessary for 

machine operations will be installed.
1. Make sure that the machine is connected to your computer and powered 

on.

If the “Found New Hardware Wizard” window appears during the 

installation procedure, click Cancel in close the window.

2. Insert the supplied software CD into your CD-ROM drive.

•

The software CD should automatically run and an installation window 

appears.

•

If the installation window does not appear, click Start and then Run. 

Type X:\Setup.exe, replacing “X” with the letter which represents 

your CD-ROM drive. Click OK.

•

If you use Windows Vista, Windows 7 and Windows 2008 Server R2 

click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter which represents 

your CD-ROM drive and click OK.

•

If the AutoPlay window appears in Windows Vista, Windows 7 and 

Windows 2008 Server R2, click Run Setup.exe in Install or run 

program field, and click Continue or Yes in the User Account 

Control windows.

3. Select Install now.

If necessary, select a language from the drop-down list.

•

For CLX-6250 Series installation window, you can see Wireless 

Setting and Installation menu. You can use this menu if an 

optional wireless network card is installed and/or the machine 

is connected to your computer with a USB cable. 
Install the optional wireless network card. Instructions for 

Wireless Setting and Installation, refer to the wireless 

network installation guide provided with the optional wireless 

network card. 

•

The Advanced Installation has two options, Custom