Samsung CLX-6250 Manual De Usuario

Faxing_ 4

6.Press Stop/Clear to return to ready mode.

You can cancel the delayed fax job which is saved in memory.
1.Press Menu on the control panel.
2.Press the up/down arrow to highlight Fax Feature and press OK.
3.Press the up/down arrow to highlight Cancel Job and press OK.
4.Press the up/down arrow until the fax job you want appears and press 

OK.

5.Press OK when Yes highlights.

The selected fax is deleted from memory.

6.Press Stop/Clear to return to ready mode.

This function is used when a high priority fax need to be sent ahead of 

reserved operations. The original is scanned into memory and immediately 

transmitted when the current operation is finished. In addition, priority 

transmission will interrupt a sending to multiple destinations between 

stations (example, when the transmission to station A ends, before 

transmission to station B begins) or between redial attempts.

1. Press 

 (Fax) on the control panel.

2. Load originals face up into the document feeder, or place a single 

original face down on the scanner glass.

3. Adjust the resolution and the darkness to suit your fax needs (See 

4. Press Menu on the control panel.
5. Press the up/down arrow to highlight Fax Feature and press OK.
6. Press the up/down arrow to highlight Priority Send and press OK.
7. Enter the number of the receiving fax machine and press OK.

You can press speed dial numbers or select group dial number using 

Address book button. For details, see "Setting up address book" on 

8. Enter the job name you want and press OK.

The original is scanned into memory before transmission.

9. If an original is placed on the scanner glass, select Yes to add another 

pages. Load another original and press OK.
When you have finished, select No when Another Page? appears.
The machine starts to scan and send a fax to destinations.

This is available only when you load originals into the document 

feeder.

You can set the machine to send faxes on both sides of paper.

1. Press 

 (Fax) on the control panel. 

2. Place originals, face up, in the document feeder. Or you can use the 

scanner glass with a single original document face down and closed the 

scanner lid.

3. Press Duplex on the control panel.
4. Press the up/down arrow until the binding option you want highlights.

•

Off:  Send faxes in normal mode.

•

2 Side:  Send faxes on both sides of the original.

•

2->1Side ROT2:  Send faxes on both sides of the original and prints 

each one on a separate sheet, but the information on the back side 

of the printout is rotated 180°.

5. Press OK to save your selection.

This part explains how to receive a fax, and the special receiving methods 

available.

Your machine is preset to Copy mode at the factory; however you can 

change the default so fax is priority (See "Changing the default mode" on 

page 2). When you receive a fax, the machine answers the call on a 

specified number of rings and automatically receives the fax. But if you want 

to change the Fax mode to another mode, follow the steps below:

1. Press 

 (Fax) on the control panel.

2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Fax Setup and press OK.
4. Press the up/down arrow to highlight Receiving and press OK.
5. Press the up/down arrow to highlight Receive Mode and press OK.
6. Press the up/down arrow until the fax reception mode you want 

highlights.

•

Fax:  Answers an incoming fax call and immediately goes into the fax 

reception mode.

•

Tel:  Receives a fax by pressing On Hook Dial and then Start.

•

Ans/Fax:  Is for when an answering machine attached to your machine. 

Your machine answers an incoming call, and the caller can leave a 

message on the answering machine. If the fax machine senses a fax 

tone on the line, the machine automatically switches to Fax mode to 

receive the fax.

•

DRPD:  you can receive a call using the Distinctive Ring Pattern 

Detection (DRPD) feature. Distinctive Ring is a telephone company 

service which enables an user to use a single telephone line to 

answer several different telephone numbers. For further details, see 

This setting may not be available depending on your country. 

7. Press OK to save your selection.
8. Press Stop/Clear to return to ready mode.

•

To use the Ans/Fax mode, attach an answering machine to the 

EXT socket on the back of your machine. 

•

If you do not want other people to view your received documents, 

you can use secure receiving mode. In this mode, all of the 

received faxes are stored in memory. For further details, see 

You can receive a fax call by pressing On Hook Dial and then pressing 

Start when you hear a fax tone ; however you can change the default so fax 

is priority (See "Changing the default mode" on page 2). The machine 

begins receiving the fax.
To change the number of rings, see "Changing the fax setup options" on 

page 1.

To use this mode, you must attach an answering machine to the EXT socket 

on the back of your machine (See "Rear view" on page 2).
If the caller leaves a message, the answering machine stores the message 

as it would normally. If your machine detects a fax tone on the line, it 

automatically starts to receive the fax.