Samsung CLX-6250 Manual De Usuario

Using USB memory device_ 1

1.

using usb memory device

This chapter explains how to use a USB memory device with your machine.

•

•

•

•

•

  

USB memory devices are available with a variety of memory capacities to 

give you more room for storing documents, presentations, music and 

videos, high resolution photographs, or whatever other files you want to 

store or move.
You can do the following on your machine using an USB memory device:

•

Scan documents and save them on an USB memory device.

•

Print data stored on an USB memory device.

•

Format the USB memory device.

Your machine supports USB memory devices with FAT16/FAT32 and 

sector size of 512 bytes. 
Check your USB memory device’s file system from your dealer.
You must use only an authorized USB memory device with an A plug type 

connector.

Use only an USB memory device with metal-shielded connector.

Insert a USB memory device into the USB memory port on your machine.

•

Do not remove the USB memory device while it is in use. The 

machine warranty does not cover damage caused by user’s 

misuse. 

•

If your USB memory device has certain features (example, security 

key, security partition, booting disk, password settings and so 

forth), do not use the USB memory device with your machine. The 

files stored in the USB memory device may be corrupted, or the 

machine may not automatically detect it. For details about these 

features, see device’s User’s Guide.

You can scan a document and save the scanned image onto an USB 

memory device. There are two ways of doing this: you can scan to the 

device using the default settings, or you can customize your own scan 

settings. When you scan a document, the machine uses the default settings 

such as the resolution. You can also customize your own scan setting.
If your USB memory device has certain features (example, security key, 

security partition, booting disk, password settings and so forth), do not use 

the USB memory device with your machine. The files stored in the USB 

memory device may be corrupted, or the machine may not automatically 

detect it. For details about these features, see device’s User’s Guide.

1. Insert a USB memory device into the USB memory port on your 

machine.

2. Load originals face up into the document feeder, or place a single 

original face down on the scanner glass. 

3. Press 

 (Scan/Email) and press OK.

4. Press the up/down arrow to highlight Scan To USB and press OK.

Your machine begins scanning the original, and then asks if you want to 

scan another page.

5. To scan another page, press the left/right arrow to highlight Yes and 

press OK. Load an original and press Start.
Otherwise, press the left/right arrow to highlight No and press OK. 

6. After scanning is complete, you can remove the USB memory device 

from the machine.

You can specify image size, file format, or color mode for each scanning to 

USB job.

1. Press 

 (Scan/Email) on the control panel.

2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Scan Feature and press OK.
4. Press the up/down arrow to highlight USB Feature and press OK.
5. Press the up/down arrow to highlight the setting you want and press OK.

You can set the following options:

•

Scan Size:  Sets the image size.