Samsung CLX-8385ND Series Manual De Usuario

1.7   

<Introduction>

When the machine is not in use, save electricity with the provided power 
save mode. Pressing this button puts the machine into power save mode. 
(Page 3.6)

If you press Power Saver button for more than two seconds, a window appears, 
requesting that you turn the power off. If you choose Yes, the power is turned off. 
This button can also be used to turn the button on.

When you press Interrupt button, the machine goes into interrupt mode 
which means it stops a printing job for urgent copy job. When the urgent 
copy job completes, the previous printing job continues. 

Interrupt mode is resumed at default value (Off) after the 
machine is shut down or reset. 

When the problem occurs, the Status LED indicates the machine's 
condition by the light color of it's action.

Off

• The machine is not in the power save mode.
• The machine is in the low power save mode.

Blue

On

The machine is in the power save mode.

Blink

The machine is in the ready power save mode.

Off

The machine is not in interrupt printing mode.

Blue

On

The machine is in interrupt printing mode.

Off

• The machine is off-line.
• The machine is in power save mode. When 

data is received, or any button is pressed, it 
switches to on-line automatically.

Green

On

The machine is on-line and can be used.

Blinking

• When the backlight slowly blinks, the machine 

is receiving data from the computer.

• When the backlight blinks rapidly, the machine 

is printing data. 

Check the message on the display screen, and follow the 
instruction on the message or refer to Troubleshooting part. 
(Page 12.1) If the problem persists, call for service.

Red

On

• The imaging unit is out of lifespan. Remove 

the old imaging unit and install a new one. 
(Page 11.6)

• A toner cartridge has reached its estimated 

cartridge life

a

.

 Remove the old toner cartridge 

and install a new one. (Page 11.4)

• A paper jam has occurred. (Page 12.3)
• The cover is opened. Close the cover.
• There is no paper in the tray. Load paper in 

the tray.

• The machine has stopped due to a major 

error. Check the display message. 
(Page 12.11) 

• The waste toner container not installated in 

the machine, or full waste toner container. 
(Page 11.8)

Blinking

• A minor error has occurred and the machine 

is waiting the error to be cleared. Check the 
display message. When the problem is 
cleared, the machine resumes. 

• Small amount of toner is left in the cartridge. 

The estimated cartridge life of toner is close. 
You can temporarily improve print quality by 
redistributing the toner. (Page 11.4)

a. Estimated cartridge life means the expected or estimated toner cartridge life, 

which indicates the average capacity of print-outs and is designed pursuant to 
ISO/IEC 19798. (See General specifications.) The number of pages may be 
affected by operating environment, printing interval, media type, and media 
size. Some amount of toner may remain in the cartridge even when “End of 
life, Replace with new [xxx] toner cartridge” appears and the printer stops 
printing.