Samsung CLX-8385ND Series Manual De Usuario
3.3
<Getting Started>
9
Select Static and then enter IP Address, Subnet Mask and
Gateway address fields. Touch the input area then, enter addresses
by number keypad on the control panel.
Gateway address fields. Touch the input area then, enter addresses
by number keypad on the control panel.
Note
Contact the network administrator, if you are not sure how to
configure.
configure.
10 Press OK.
Installing the software
You have to install the machine software for printing and scanning. The
software includes drivers, applications, and other user friendly programs.
software includes drivers, applications, and other user friendly programs.
Note
You can also set up the network settings through the network
administration programs.
administration programs.
• SyncThru™ Web Admin Service: Web-based printer
management solution for network administrators. SyncThru™
Web Admin Service provides you with an efficient way of
managing network devices and lets you remotely monitor and
troubleshoot network machines from any site with corporate
internet access. Download this program from
Web Admin Service provides you with an efficient way of
managing network devices and lets you remotely monitor and
troubleshoot network machines from any site with corporate
internet access. Download this program from
.
• SyncThru™ Web Service: Web server embedded on your
network print server, which allows you to:
- Configure the network parameters necessary for the machine
to connect to various network environments.
- Customize email settings and set up address book for
scanning to email.
- Customize server settings and set up address book for
scanning to the FTP or SMB servers.
- Customize printer, copy, and fax settings.
• SetIP: Utility program allowing you to select a network interface
and manually configure the IP addresses for use with the TCP/IP
protocol. You can only use IPv4 setting for Set IP
and manually configure the IP addresses for use with the TCP/IP
protocol. You can only use IPv4 setting for Set IP
.
Note
• The following procedure is for when the machine is being used
as a network machine. If you want to connect a machine with
a USB cable, refer to Software section .
a USB cable, refer to Software section .
• The following procedure is based on the Windows XP
operating system. The procedure and popup window which
appears during the installation may differ depending on the
operating system, the printer feature, or the interface in use.
(See Software section.)
appears during the installation may differ depending on the
operating system, the printer feature, or the interface in use.
(See Software section.)
1
Make sure that the network setup for your machine is completed.
(Page 3.2) All applications should be closed on your computer
before beginning installation.
(Page 3.2) All applications should be closed on your computer
before beginning installation.
2
Insert the Printer Software CD-ROM into your CD-ROM drive.
3
The CD-ROM should automatically run, and an installation window
appears. Click Next.
appears. Click Next.
• If the installation window does not appear, click Start > Run. Type
X:\Setup.exe, replacing “X” with the letter which represents your
drive and click OK.
drive and click OK.
• If you use Windows Vista, Windows 7 and Windows 2008 Server
R2, click Start > All Programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter which represents
your drive and click OK.
Type X:\Setup.exe replacing “X” with the letter which represents
your drive and click OK.
• If the AutoPlay window appears in Windows Vista, Windows 7 and
Windows 2008 Server R2, click Run Setup.exe in Install or run
program field, and click Continue in the User Account Control
windows.
program field, and click Continue in the User Account Control
windows.
4
Click Next.
• Select a language from the drop-down list, if necessary.