Samsung CLX-8385ND Series Manual De Usuario

10.5   

<Machine status and advanced setup>

This machine offers you with various options to you for setting up the fax 
system. You can change the default settings for your preferences and 
needs.

Press Machine Setup on the control panel.

Press Admin Setting. When the login message pops up, enter 
password and press OK.

Press the Setup tab > Fax Setup.

The fax options are different from country to country 
depending on the international communication regulatory. If 
the display screen does not show or gray out some of the 
fax options explained herein, it means that the grayed out 
function does not supported in your communication 
environment.

Machine ID & 
Fax No 

Enter the machine ID name and fax number 
which will be printed at the top of each page. 

This feature works best when you are using an 
extension telephone connected to the EXT 
socket on the back of your machine. You can 
receive a fax from someone you are talking to 
on the extension telephone, without going to the 
fax machine. (Page 6.6)

It helps with poor line quality and makes sure 
any faxes you send are properly transmitted to 
any other ECM-equipped fax machines. 
Sending a fax using ECM may take more time.

You can set Receive Mode for Telephone, Fax 
or Answering Machine/Fax, and Dial Mode at 
either Tone or Pulse. 

When you select Answering Machine/Fax, 
you can receive a fax while the line is being 
used by the answering machine. (Page 6.5)

Contact your local telephone company for Dial 
Mode setting information.

You can specify the number of times the 
machine rings before answering an incoming 
call.

Use this option to automatically print the page 
number, date and time of fax reception at the 
bottom of each page.

You may need to prevent your received faxes 
from being accessed by unauthorized people. 
This feature restricts printing of received faxes 
when the machine is unattended. If you select 
this option to On, all incoming faxes go into 
memory. 

A four-digit Passcode is used when you want 
to print out received faxes in memory. 
(Page 6.6)

•  When receiving a fax containing pages longer 

than the paper loaded in the tray, the machine 
can reduce the size of the original to fit the size 
of the paper loaded in the machine. If this 
feature is set to Off, the machine cannot 
reduce the original to fit onto one page. The 
original will be divided and printed in actual 
size on two or more pages. If you set this 
option to On and set the discard size to 10 mm 
and the received data is longer then the 
currently set paper in the tray, the machine 
minuses the specified segment set as the 
discard size.

•  You can set the machine to print out the fax on 

both sides of the paper, or stapled. (Page 6.6)

The machine can automatically redial a remote 
fax machine, if it was busy. You can set the 
number of redial attempts and an interval 
between attempts. Selecting 0 for Redial 
Times means that the machine will not use this 
feature.

This controls the sound when a fax actually 
starts to transfer data. If this option is On, the 
machine sounds from a fax starts until a fax 
finishes. With Comm. the machine sounds only 
until the communication is succeeded. No 
sound with Off option.