Samsung 4700 Manual De Usuario

1.21

Getting Started

The current date and time are shown on the display when the machine is

on and ready for use (Standby mode). The date and time are printed on

all transmitted faxes.

When you install the SF-4700 for the first time, or when the product is

without power for about 15 seconds, the display prompts you to reset the

date and time.

1. Press Setup on the front panel. The display asks you to set the month.

2. Enter the correct date and time for each item using the number

keypad. Each time you enter the appropriate number, the display asks

you to enter the next item in the following order: MONTH, DATE,

YEAR, HOUR, MINUTE, AM/PM. 

You can change the clock mode to 24 hour or 12 hour modes. See

“Setting User-Selectable System Options” on page 4.34. If the 12

hour mode is selected, AM/PM selection is not available when you set

the date and time.

If you enter an invalid number, the display does not proceed to the

next step. If this happens, re-enter the correct number.

To select a specific item to change, press Option repeatedly to find

the item. After setting, press Start/Enter to save.

3. When you are finished, the display returns to Standby mode and

shows the date and time. 

Note: If you press Setup in Standby mode, and press Start/Enter, you can

also access this menu option.

SET DATE & TIME

PRESS SETUP

DATE JAN/01/2000
01 = JAN

MONTH

02=Feb

03=Mar

...

.

month setting