Samsung SL-C460FW/XAA Hoja De Datos

 

Before entering the IP address for the machine, you must know the 
computer’s network configuration information. If the computer’s network 
configuration is set to DHCP, the wireless network setting should also be 
DHCP. Likewise, if the computer’s network configuration is set to Static, the 
wireless network setting should also be Static.

If your computer is set to DHCP and you want to use the Static wireless 
network setting, you must contact the network administrator to get the 
static IP address.

•

If the IP address assignment method is DHCP, check if DHCP is shown in 
the Wireless Network Setting Confirm window. If it shows Static, click 
Change TCP/IP to change the assignment method to Receive IP 
address automatically (DHCP).

•

If the IP address assignment method is Static, check if Static is shown in 
the Wireless Network Setting Confirm window. If it shows DHCP, click 
Change TCP/IP to enter the IP address and other network configuration 
values for the machine.

For example,

If the computer’s network information is as shown follows:

-

IP address: 169.254.133.42

-

Subnet Mask: 255.255.0.0

Then, the machine’s network information should be as below:

-

IP address: 169.254.133.43

-

Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)

-

Gateway: 169.254.133.1

 

The Wireless Network Setting Complete window appears. Click Next.

When the wireless network settings are completed, disconnect the USB 
cable between the computer and machine. Click Next.

Follow the instructions in the installation window.

16 

•

Access point

•

Network-connected printer

•

Software CD that was provided with your machine

•

A machine installed with a wireless network interface

•

 

USB  cable