Samsung SL-C460FW/XAA Hoja De Datos

When loading preprinted paper, the printed side should be facing up with an 

uncurled edge at the front. If you experience problems with paper feeding, turn 

the paper around. Note that print quality is not guaranteed.

•

Must be printed with heat-resistant ink that will not melt, vaporize, or 
release hazardous emissions when subjected to the machine’s fusing 
temperature for 0.1 second (about 170°C (338°F)).

•

Preprinted paper ink must be non-flammable and should not adversely 
affect machine rollers.

•

Before you load preprinted paper, verify that the ink on the paper is dry. 
During the fusing process, wet ink can come off preprinted paper, reducing 
print quality.

5 

After loading paper in the paper tray, set the paper size and type using the 

control panel buttons. 

 

•

The paper setting in the machine and driver should match to print 
without a paper mismatch error. 

To change the paper setting set in the machine, from the Samsung Easy 

 select 

 > Device 

Settings.

Or if your machine supports a display screen, you can set it using the 

(Menu) button on the control panel.

Then, set the paper type from the Printing preferences window > 
Paper tab > Paper Type (see "Opening printing preferences" on page 
54).

•

It may be necessary to press 

 to navigate to lower-level menus for 

some models.

 

Select (Menu) button on the control panel.

Press System Setup > Paper Setup > Paper Size or Paper Type.

Select the tray and the option you want.

Press OK to save the selection.