Samsung SCX-5112 Manual De Usuario

T

ROUBLESHOOTING

8.13

The following chart lists some conditions that may occur and the 
recommended solutions. Follow the suggested solutions until 
the problem is corrected. If the problem persists, please call for 
service.

TONER EMPTY

The toner cartridge has 
run out. The product 
stops.

Replace with a new toner 
cartridge. See page 7.3.

TONER LOW

The toner is almost 
empty.

Take out the toner cartridge and 
gently shake it. By doing this, you 
can temporarily re-establish 
printing operations.

The LCD does not turn on.

Check that the product is plugged into an electrical 
receptacle.
Ensure that there is power to the receptacle and that 
the product power switch is in the ON position.

The product beeps an error 
sound and does not make a 
copy.

Make sure that the product is in the Copy mode. If 
not, chagne the mode into the Copy mode by 
pressing Mode/Enter. 

Copies are too light or too 
dark.

If the original is light, use the Contrast button to 
darken the background of the copies.

If the original is dark, use the Contrast button to 
lighten the background of the copies.

Smears, lines, marks, or 
spots on copies.

If detects are on the original, press the Contrast 
button to lighten the background of your copies.

If no defects are on the original, clean the document 
glass and underside of the document cover.