Samsung CLX-6220 Manual De Usuario

Media and tray_ 7

machine’s fusing temperature for 0.1 second. Check your machine’s 

specification to view the fusing temperature about 170°C(338 °F). 

•

Used paper ink must be non-flammable and should not adversely affect 

machine rollers.

•

Before you load used paper, verify that the ink on the paper is dry. 

During the fusing process, wet ink can come off used paper, reducing 

print quality.

•

Make sure not to use the inkjet photo paper with this machine. It could 

cause damage to the machine. 

Load one paper to the multi-purpose tray at a time, glossy side facing 

down. 

•

Recommended media: Glossy paper (Letter) for this machine by HP 

Brochure Paper (Product: Q6611A) only.

•

Recommended media: Glossy paper (A4) for this machine by HP 

Superior Paper 160 glossy (Product: Q6616A).

Load one paper to the multi-purpose tray at a time, side to be printed 

facing down. 

After loading paper in the paper tray, set the paper size and type using the 

control panel. These settings will apply to copy and fax modes. For 

computer printing, select the paper size and type in the application program 

you use on your computer (See "Opening printing preferences" on page 2).

The settings made from the machine driver override the settings on 

the control panel.

1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Paper Setup and press OK.
4. Press the up/down arrow to highlight Paper Size and press OK.
5. Press the up/down arrow to select the paper tray you want and press 

OK.

6. Press the up/down arrow to select the paper size you want.
7. Press OK to save the selection.
8. Press Stop/Clear to return to ready mode.

If you want to use special-sized paper-such as a billing paper, select 

Custom in the Paper tab in the Printing Preferences (See "Opening 

printing preferences" on page 2).

1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Paper Setup and press OK.
4. Press the up/down arrow to highlight Paper Type and press OK.
5. Press the up/down arrow to select the paper tray you want and press 

OK.

6. Press the up/down arrow to select the paper type you want.
7. Press OK to save the selection.

8. Press Stop/Clear to return to ready mode.

1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Paper Setup and press OK.
4. Press the up/down arrow to highlight Paper Source and press OK.
5. Press the up/down arrow to highlight Copy Tray or Fax Tray and press 

OK.

6. Press the up/down arrow to select the paper tray you want.
7. Press OK to save the selection.
8. Press Stop/Clear to return to ready mode.

If you want to use special-sized paper-such as a billing paper, select 

Edit.. in the Paper tab in the Printing Preferences (See "Opening 

The surface of the output tray may become hot if you print a large 

number of pages at once. Make sure that you do not touch the 

surface, and do not allow children near it.

The printed pages stack on the output tray, and the output support will help 

the printed pages to align. For the output support to correctly align the 

pages, you need to pull it out appropriately depending on the paper size.

•

If paper coming out of the output try has problems, such as excessive 

curl, try printing to the rear door.

•

If the output support is incorrectly adjusted, printed pages may be 

mis-aligned or fall.