Samsung CLX-8380ND Manual De Usuario

3.4   

<Getting Started>

This program is for the network IP setting using the MAC address which 
is the hardware serial number of the network printer card or interface. 
Especially, it is for the network administrator to set several network IPs at 
the same time. 

The following procedure is based on windows XP. If you use Macintosh 
or Linux OS, see Software section.

• You can only use SetIP program when your machine is 

connected to a network.

• The following procedure is based on the Windows XP 

operating system. If you are using Macintosh or Linux, See 
Software section.

http://

developer.apple.com/networking/bonjour/download/

, select 

the program Bonjour for Windows due to your computer 
operating system, and install the program. This program will 
allow you to fix the network parameter automatically. Follow 
the instruction in the installation window. This Bonjour 
program does not support Linux

Insert the driver CD provided along with your machine. When the 
driver CD runs automatically, close the window.

Start Windows Explorer and open the X drive. (X represents your 
CD-ROM drive.)

Double click Application > SetIP.

Open the folder of the language you plan to use.

Double click Setup.exe to install this program. 

Follow the instructions in the window and complete the installation.

From the Windows Start menu, select Programs > Samsung 
Network Printer Utilities > SetIP.

Select the name of your printer and click

 

. 

If you cannot find your printer name, click 

 to refresh the 

list.

Enter the network interface's MAC address, IP address, subnet 
mask, default gateway, and then click Apply.

If you do not know the network interface's MAC address, 
print the machine's network information report. (See 

Click OK to confirm the settings.

Click Exit to close the SetIP program.