Samsung CLX-8380ND Manual De Usuario

6.5   

<Faxing (Optional)>

This feature works best when you are using an extension telephone 
connected to the EXT socket on the back of your machine. You can 
receive a fax from someone you are talking to on the extension 
telephone, without going to the fax machine.

When you receive a call on the extension phone and hear fax tones, 
press the keys 

 on the extension phone. The machine receives the 

fax.

Press the buttons slowly in sequence. If you still hear the fax tone from 
the remote machine, try pressing 

 once again.

To change the 

 to, for example, 

, follow the next steps.

Press Machine Setup on the control panel.

Select Admin Setting. When the login message pops up, then 
enter password and press OK. (Page 3.5)

Press the Setup tab > Fax Setup > Receive Start Code. 

Select On.

Press left/right arrows to display number 3.

Press OK.

You may need to prevent your received faxes from being accessed by 
unauthorized people. You can turn on secure receiving mode to restrict 
printing of received faxes when the machine is unattended. In secure 
receiving mode, all incoming faxes go into memory. 

Press Machine Setup on the control panel.

Select Admin Setting. When the login message pops up, then 
enter password and press OK. (Page 3.5)

• If you have set your machine to this mode and your answering 

machine is switched off, or no answering machine is connected 

to EXT socket, your machine automatically goes into Fax mode 

after a predefined number of rings.

• If your answering machine has a user-selectable ring counter, 

set the machine to answer incoming calls within 1 ring.

• If you are in Telephone mode when the answering machine is 

connected to your machine, you must switch off the answering 

machine, or the outgoing message from the answering 

machine will interrupt your phone conversation.

• While the machine is receiving a fax, you can not do the copy 

job. 

Press the Setup tab > Fax Setup > Secure Receive. 

Select On.

Enter Passcode with 4 digit number using the number keypad on 
the control panel.

To deactivate the Secure Receive feature, press Off. In this 
case, the received fax will be printed out.

Set this duplex feature to save paper. When the machine prints the 
received fax data, it prints them on both sides of the paper.

Press Machine Setup on the control panel.

Select Admin Setting. When the login message pops up, then 
enter password and press OK. (Page 3.5)

Press the Setup tab > Fax Setup > Received Fax Printing > 
Duplex.

Select appropriate option.
• Off: Prints only one side of the paper.
• Long Edge: Prints both sides of the paper, however the binding 

will be the long edge.

• Short Edge: Prints both sides of the paper, however the binding 

will be the short edge.

Press OK.

Since your machine is a multi-tasking device, it can receive faxes while 
you are making copies or printing. If you receive a fax while you are 
copying or printing, your machine stores incoming faxes in its memory. 
Then, as soon as you finish copying or printing, the machine 
automatically prints the fax. 

Before sending a fax, you can adjust the document settings, such as 
resolution, darkness, color, duplex and so forth. Refer to explanation of 
this section.

The document setting herein is for only current job. If you want 
to change the default setting on document settings, refer to 
Admin Setting > General tab > Default Settings. (Page 10.2)

This function is especially intended for two-sided originals. You can select 
whether the machine sends the fax on one side or both sides of the paper. 

Load the originals onto the DADF to use this function.