Samsung CLX-8380ND Manual De Usuario

7.8   

<Scanning>

This part explains how to adjust the document settings for each scan job, 
such as resolution, duplex, original size, type, color mode, darkness, and 
more. The options you change will be maintained for a certain time, but 
after that period, the options will be reset to default values.

This feature especially applies when the original documents to be 
scanned are two-sided. You can select whether the machine scans only 
one side of the paper or both sides of the paper. 

Press Scan > Scan to Email (Or Scan to Server) > the Basic tab > 
Duplex. Use left/right arrows to toggle the values. 

• 1 Sided: For originals that are printed on one side only.
• 2 Sided: For originals that are printed on both sides. 
• 2 Sided, Rotate Side 2: For originals that are printed on both 

sides. But the back is rotated 180 degrees.

To use 2 Sided and 2 Sided, Rotate Side 2, you have to load 
the originals on the DADF. Because, if the machine can not 
detect the original on DADF, automatically changes the option to 
1 Sided.

You can adjust document resolution.

Press Scan > Scan to Email (Or Scan to Server) > the Basic tab > 
Resolution. Use left/right arrows to toggle the values. The higher value 
you select the clear result you get. But the scanning time may take longer.

Commonly, 100 dpi , 200 dpi and 300 dpi resolution are available only 
when Color Mode is set to Color or Gray. The following table shows 
detailed information feature, resolution and file format options.

Scan to Email

100, 200, 300, 400, 
600

PDF, Single-Page 
TIFF, Multi-Page TIFF, 
JPEG

NetScan

100, 200, 300, 400, 
600

PDF, TIFF, JPEG

Scan to Server

100, 200, 300, 400, 
600

PDF, Single-Page 
TIFF, Multi-Page TIFF, 
JPEG

You can specify the scanning area on the originals by selecting the pre-
defined size, or putting in the margin value or Auto. If you set this option 
to Auto, the machine senses and determines the size of the original.

Press Scan > Scan to Email (Or Scan to Server) > the Advanced tab 
> Original Size. Use up/down arrows to go to the next screen. Select the 
appropriate option and press OK. 

You can set the original document type in order to enhance the quality of 
a document being scanned. 

Press Scan > Scan to Email (Or Scan to Server) > the Image tab > 
Original Type. Select the appropriate option and press OK. 

• Text: For originals that have text or line art.
• Text/Photo: For originals that have both text and photographs 

together.

• Photo: For originals that are continuous tone photographs.

Use this option to scan the original in Mono, Gray or Color mode. 

Press Scan > Scan to Email (Or Scan to Server) > the Image tab > 
Color Mode. Select the appropriate option and press OK. 

• Color: Uses color to display an image. 24 bits per pixel, 8 bits for 

each RGB, is used for 1 pixel.