Samsung CLX-8380ND Manual De Usuario

10.7   

<Machine status and advanced setup>

It enables the authentication 
mode which is set from the Job 
Account menu in the 
SyncThru™ Web Admin 
Service.

When you install the optional 
FDI kit, select On to activate it.

• Job Timer: If there is not 

enough credit, you can set the 
machine to cancel a job right 
away or wait a designated 
amount of time for a deposit.

• Print Job Control: When it is 

enabled, the both computer 
printing and copying are 
possible since the credit 
remains. With Disable, copy 
printing needs the credit. 
However, when printing a 
report or a fax, the credit is not 
needed.

• Inhibit Services: When no 

credit is left, the machine 
disables the copy job only with 
Copy Only. With All Service, 
scanning service and copy job 
are disabled.

• Internal Credits: It is used 

when you cancel the job or 
when the job is cancelled by 
the device due to insufficient 
credits (coin) or is canceled by 
user’s request. If you select 
Enable, the machine deposits 
a credit equal to the number 
of sheets that did not print out 
correctly, then it prints next job 
for free (for the amount 
deposited). With Disable, 
even if you cancel the printing 
job, the machine includes 
jammed paper in the count 
and the cost of printing shall 
be recovered for the pages 
already billed.

• Image Counter: Depends on 

whether the machine counts 
blank white pages.

(Continue)

It disables Authentication 
Mode.

When you want to add the optional features for this machine, you have to 
install the optional kit and then set the machine to enable and activate 
those features. Follow the next steps to enable those features.

Press Machine Setup on the control panel.

Press Admin Setting. When the login message pops up, then enter 
password and press OK.

Press the Setup tab > Optional Service.

You can change the password 
for the Admin Setting 
authentication.

Enables or disables the Copy menu from the 
main screen.

After installing the fax kit, select this option 
Enable to use this machine as a fax machine.

Enables or disables the Scan to Email menu 
from the scan screen.

Set Enable to activate the scanning and 
sending it via network.

Enables or disables the Scan to SMB option 
from the scan screen.

Enables or disables the Scan to FTP option 
from the scan screen.

You can set the machine to delete previous job 
information on HDD as you store new job 
information. Set this option to Enable, go to the 
General tab > On Demand Overwrite, press 
Start in the display to start the overwriting job.

If you select Enable, the machine renews the 
HDD memory when you save new job on it.