OKI S700 Manual De Usuario
MAINTENANCE > 51
CLEANING THE ADF
Disregard this section if you do not have an ADF.
From time to time, the pad assembly and feeding rollers of the ADF
may become contaminated with ink, toner particles or paper dust. In
this event, the ADF may not feed documents smoothly. If this occurs,
follow the cleaning procedure below.
may become contaminated with ink, toner particles or paper dust. In
this event, the ADF may not feed documents smoothly. If this occurs,
follow the cleaning procedure below.
1.
Moisten a cotton swab with a non-corrosive solvent such as
isopropyl alcohol (purity at least 99.5%).
isopropyl alcohol (purity at least 99.5%).
2.
Carefully open the ADF front cover.
3.
Wipe the feeding rollers (1) by moving the swab from side to
side. Rotate the rollers forward with your finger and repeat
wiping until the rollers are clean. Be careful not to snag or
damage the ADF pad (2) springs.
side. Rotate the rollers forward with your finger and repeat
wiping until the rollers are clean. Be careful not to snag or
damage the ADF pad (2) springs.
4.
Wipe the ADF pad (2) from top to bottom, being careful not to
hook the springs.
hook the springs.
5.
Close the ADF front cover.
1
2