OKI C330 Manual De Usuario

The multi purpose tray can handle the same sizes as trays 1 and 

2 but in weights up to 58 lb. US Bond (220 

g/m²)

. For very heavy 

paper stock use the face up (rear) paper stacker. This ensures 

that the paper path through the printer is almost straight.
The multi purpose tray can feed paper widths from 3 inches 

(76 mm) to 8.5 inches (215.9 mm) and lengths from 5 inches 

(127 mm) to 52 inches (1320 mm) (banner printing).
For paper lengths exceeding Legal 14-inch (356 mm) use paper 

stock between 28 lb. US Bond (90 g/m²) and 32 lb. US Bond 

(128 g/m²) and the face up (rear) paper stacker.
Use the multi purpose tray for printing on envelopes and labels. 

Up to 10 envelopes can be loaded at one time, subject to a 

maximum stacking depth of about 3/8-inch (10 mm).

The face down stacker on the top of the printer can hold up to 

150 sheets of 21 lb. US Bond (80 g/m²) standard paper, and can 

handle paper stocks up to 47 lb. US Bond (176 g/m²). 
Pages printed in reading order (page 1 first) will be sorted in 

reading order (last page on top, facing down).

The face up stacker at the rear of the printer should be opened 

and the tray extension pulled out when required for use. In this 

condition paper will exit via this path, regardless of driver 

settings.
The face up stacker can hold up to 100 sheets of 21 lb. US Bond 

(80 g/m²) standard paper, and can handle stocks up to 58 lb. 

US Bond (220 g/m²).
Always use this stacker and the multi purpose feeder for paper 

stocks heavier than 47 lb. US Bond (176 g/m²).

Automatic two-sided printing on the same range of paper sizes 

as tray 2 (i.e. all cassette sizes except A6), using paper stocks 

from 17-47 lb. US Bond (64-176 g/m²).