Zebra Technologies RXi4 Manual De Usuario
Load Ribbon
22
P1008806-002
Xi4™/RXi4™ Quick Reference Guide
3/8/10
Remove Used Ribbon
Remove used ribbon from the ribbon take-up spindle each time you change the roll of ribbon.
To remove used ribbon, complete these steps:
1.
Has the ribbon run out?
2.
While holding the ribbon take-up spindle, turn the ribbon release knob clockwise until it
stops.
stops.
The ribbon release bars pivot down, easing the spindle’s grip on the used ribbon.
3.
Slide the used ribbon off of the ribbon take-up spindle and discard.
If the ribbon...
Then
Ran out
Continue with the next step.
Did not run out
Cut or break the ribbon before the ribbon take-up spindle.