Canon 5119B001AA Manual De Usuario
8-4
M
ain
tenanc
tenanc
e
Cleaning the Feeder Automatically
If your document has black streaks or appears dirty after it has
been scanned from the feeder, the rollers inside the feeder
may be dirty. Clean the roller using blank paper.
Menu
OK
Keys to be used for this operation
1
Press [
] (Menu).
2
Select <Adjustment/Maintenance> using [ ] or
[ ] and press [OK].
Menu
Scan Settings
USB Direct Print Se
Scan Settings
USB Direct Print Se
...
Printer Settings
Adjustment/Maintenan
3
Select <Clean Feeder> using [ ] or [ ] and press
[OK].
Adjustment/Maintenance
Special Processing
Clean Fixing Unit
Clean ITB
Special Processing
Clean Fixing Unit
Clean ITB
Clean Feeder
4
Load 10 sheets of A4 or Letter size plain paper in
the feeder, and then press [OK].
The cleaning begins. It takes approximately 65 seconds to
complete the process.
complete the process.
Clean Feeder
Load 10 sheets of A4
or LTR in feeder.
Load 10 sheets of A4
or LTR in feeder.
Start
5
Press [
] (Menu) to close the menu screen.
Precautions When Cleaning the Machine
Before cleaning the machine, note the following.
• Make sure that no jobs are stored in memory before
• Make sure that no jobs are stored in memory before
turning OFF the power switch and disconnecting the
power cord.
• Use a soft cloth to avoid scratching the components.
• Do not clean the machine components with tissue paper,
• Do not clean the machine components with tissue paper,
paper towels, or similar materials. These materials tend to
stick to the components or generate static charges.
NOTE
About sending or receiving faxes
When the power plug is unplugged, the machine cannot send or
receive faxes.
receive faxes.
When a job is waiting to be printed
The job is deleted when you turn OFF the power switch.
About jobs stored in memory
Jobs can be stored in memory for approximately five minutes
after the power plug has been unplugged. To view jobs stored in
memory, see the following.
after the power plug has been unplugged. To view jobs stored in
memory, see the following.
CAUTION
Never use volatile liquids such as thinner, benzene, acetone,
or any other chemical cleaner to clean the machine. These
can damage the machine components.
Precautions to take when cleaning the feeder or the
or any other chemical cleaner to clean the machine. These
can damage the machine components.
Precautions to take when cleaning the feeder or the
platen glass cover
Do not dampen the cloth too much, as this may tear the
document or damage the machine.
Precautions to take when closing the feeder or the
Do not dampen the cloth too much, as this may tear the
document or damage the machine.
Precautions to take when closing the feeder or the
platen glass cover
Be careful not to get your fingers caught.
Precautions to take when you get toner onto your
Be careful not to get your fingers caught.
Precautions to take when you get toner onto your
hands or into clothing
If toner gets on your hands or clothing, wash them
immediately with cold water.
The toner sets onto hands or into clothing if you try to wash
it with warm water. Once it is set, you can hardly remove the
toner stains.
If toner gets on your hands or clothing, wash them
immediately with cold water.
The toner sets onto hands or into clothing if you try to wash
it with warm water. Once it is set, you can hardly remove the
toner stains.