Compaq L1502 Manual De Usuario
B–4
User’s Guide
Technical Specifications
Entering User Modes
The video controller signal may occasionally call for a mode that
is not preset if:
is not preset if:
■
You are not using a standard graphics adapter.
■
You are not using a preset mode.
If this occurs, you may need to readjust the parameters of the
monitor screen by using the on-screen display. Your changes can
be made to any or all of these modes and saved in memory. The
monitor automatically stores the new setting, then recognizes the
new mode just as it does a preset mode. In addition to the 16
factory preset modes, there are four user modes that can be
entered and stored.
monitor screen by using the on-screen display. Your changes can
be made to any or all of these modes and saved in memory. The
monitor automatically stores the new setting, then recognizes the
new mode just as it does a preset mode. In addition to the 16
factory preset modes, there are four user modes that can be
entered and stored.
Energy Saver Feature
When the monitor is in its normal operating mode, the Power
light is green.
light is green.
The monitor also supports a reduced power state. The reduced
power state is entered into if the monitor detects the absence of
either the horizontal sync signal and/or the vertical sync signal.
Upon detecting the absence of these signals, the monitor screen
blanks, the backlight turns off, and the Power light turns amber.
power state is entered into if the monitor detects the absence of
either the horizontal sync signal and/or the vertical sync signal.
Upon detecting the absence of these signals, the monitor screen
blanks, the backlight turns off, and the Power light turns amber.
Altitude:
Operating
Non-operating
Non-operating
0 to 12,000 feet
0 to 40,000 feet
0 to 40,000 feet
0 to 3657.6 m
0 to12192 m
0 to12192 m
Power Consumption
<50 watts typical
Input Terminal
15-pin D-type connector with cable included.
vf17, FP17, L1702, L1702m, f1723, and
FP7317 Models
17-inch Flat Panel Monitors (Continued)