Toshiba 3510c. Manual De Usuario
5 USING THE EDITING FUNCTIONS
182 EDITING
6
Enter the values read in step 5 for the specified area, and then
press the [SET] button. Set 4 values in order.
press the [SET] button. Set 4 values in order.
y
After the setting of 4 values is finished, the next edit area menu is displayed. Repeat
steps 5 and 6 when you specify other areas. Up to 4 areas can be specified on an
original.
steps 5 and 6 when you specify other areas. Up to 4 areas can be specified on an
original.
y
To correct the value which has been set, press the [RESET] button. Pressing it once
makes the highlighted field move one position upward. Highlight the field in which you
want to rectify the value, and then key in the correct one.
makes the highlighted field move one position upward. Highlight the field in which you
want to rectify the value, and then key in the correct one.
7
Press the [ENTER] button after specifying the area.
9
Press the [START] button.
8
Place the original(s) with its
face down.
face down.
y
Set the original with its face down
and bottom toward you and fit its top
left corner against that of the original
glass.
and bottom toward you and fit its top
left corner against that of the original
glass.
y
Select other copy modes as
required.
required.