Toshiba 210C Manual De Usuario
1
2
3
4
5
6
7
8
9
10
11
12
5-21
Select other copy modes as required.
9
Press the START key.
7
Select the repeat number.
- To change the repeat number:
Press the 2 or 8 key to select the desired repeat
number, and press the SET key.
- If the repeat number is not set, the copier automatically re-
peats the original once. Only the height direction is available
for repeat copying, and the original can be repeated up to 8
times.
for repeat copying, and the original can be repeated up to 8
times.
- If the settings of the original and copy sizes are not made
appropriately, the repeated image may not be copied com-
pletely.
pletely.
8
Place the original(s) on the glass face down and
with its bottom toward you and with its top left
aligned against the original scale on the left side.
Page 2-9
5
Enter the distance values read for the area to be re-
peated.
- Key in the value for X1 with the digital keys and press the
upper SET key.
- Similarly, set the values for X2, Y1 and Y2.
6
Press the lower SET key.