Enterasys Networks 7H4385-49 Manual De Usuario
Overview of DFE Module Shutdown Procedure
4-10 Troubleshooting
Last Resort Shutdown Procedure Using OFFLINE/RESET Switch
To reset a DFE module without it performing an orderly shutdown routine,
press and hold the OFFLINE/RESET switch for approximately 6 seconds.
Pulling any DFE module out of the chassis before it has been shut down is not
recommended. The only safe time to pull a module out of the chassis is after the
completion of a shutdown and the management LED is flashing amber/off.
recommended. The only safe time to pull a module out of the chassis is after the
completion of a shutdown and the management LED is flashing amber/off.
Caution: This method of shutting down a DFE module is not recommended except as a
last resort, because all processes currently running on the module will be interrupted
resulting in loss of frames.
Precaución: No se recomienda utilizar este método para apagar los módulos DFE- Gold.
Recurra a él sólo como último recurso, puesto que interrumpe todos los procesos del
módulo en funcionamiento, lo que podría resultar pérdidas de frames.
last resort, because all processes currently running on the module will be interrupted
resulting in loss of frames.
Precaución: No se recomienda utilizar este método para apagar los módulos DFE- Gold.
Recurra a él sólo como último recurso, puesto que interrumpe todos los procesos del
módulo en funcionamiento, lo que podría resultar pérdidas de frames.