Xerox XM3-22W Manual De Usuario

Turn off the computer and unplug the power cable.

Connect the DVI signal cable to the DVI port on the back of 

the computer.

Connect the audio cable to the out port on the back of the 

computer.

Connect the power cord to the LCD monitor and wall outlet. 

  

Press the     button, located on the bottom side of the main 

unit to turn the monitor on, then turn the computer on. If the 

monitor displays an image, the monitor is successfully 

installed. If no image is displayed, check all connections.

When the DVI and VGA input ports are connected at the 

same time, press down the AUTO button for 3 seconds to 

switch between the VGA mode and DVI mode.