Sharp PN-655U Manual De Usuario
ENGLISH
17
E
Connecting the Power Cord
Connecting the power cord
• Be sure to set the main power switch to “OFF (O)” (see page 21) before connecting or disconnecting
the power cord.
Do not use a power cord other than the one supplied with the monitor.
Be sure to use a power outlet of 120 VAC (60 Hz).
Using power supply other than the one specified may cause fire.
1. Confirm that the main power switch is set to “OFF (O)”.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
Main power switch
“OFF (O)” position
Plug
(to the AC
input
terminal)
(to the AC
input
terminal)
Power outlet
Power cord
(supplied)
(supplied)
AC input terminal
Plug
(to power outlet)
(to power outlet)
Disconnecting the power cord
1. Confirm that the main power switch is set to “OFF (O)”.
2. Unplug the power cord from the AC power outlet.
2. Unplug the power cord from the AC power outlet.
▼ Rear view