Sony GDM-5510 Manual De Usuario

10

The GEOMETRY settings allow you to adjust the rotation and 
shape of the picture.
The 

 (rotation) setting is stored in memory for all input signals. 

All other settings are stored in memory for the current input 
signal.

Press the MENU button.
The menu appears on the screen.

The GEOMETRY menu appears on the screen.

Move the control button up or down to select the 
desired adjustment item. Then press the control 
button.
The adjustment bar appears on the screen.

For more information about using the RESET mode, see 
“Resetting the adjustments (RESET)” on page 14.

The CONVERGENCE settings allow you to adjust the quality of 
the picture by controlling the convergence. The convergence 
refers to the alignment of the red, green, and blue color signals.
If you see red or blue shadows around letters or lines, adjust the 
convergence.
These settings are stored in memory for all input signals.

Press the MENU button.
The menu appears on the screen.

The CONVERGENCE menu appears on the screen.

Move the control button up or down to select the 
desired adjustment item. Then press the control 
button.
The adjustment bar appears on the screen.

For more information about using the RESET mode, see 
“Resetting the adjustments (RESET)” on page 14.

rotate the picture

expand or contract the picture sides

shift the picture sides to the left or right

adjust the picture width at the top of the screen

shift the picture to the left or right at the top of the 
screen

0 
RESET

reset all the GEOMETRY adjustments to the 
factory setting levels. Select OK.

horizontally shift red or blue shadows

vertically shift red or blue shadows

vertically shift red or blue shadows at the top of 
the screen

vertically shift red or blue shadows at the bottom 
of the screen

0 
RESET

reset all the CONVERGENCE adjustments to 
the factory setting levels. Select OK.