Sony SDM-X95 Manual De Usuario
10
p y
AEP.fm
Setup 5: Connect the power cord
1
Connect the supplied power cord securely to the
display’s AC IN connector.
display’s AC IN connector.
2
Connect the other end securely to a power outlet.
Setup 6: Secure the cords and
close the connector cover
1
Draw the cords and cables through the cable holder
as illustrated.
as illustrated.
2
Close the connector cover.
Note
When bounding the cords and cables, be sure to loosen them a little. If
they get pulled hard they may come off from the connectors/plugs as you
adjust the screen angle. If you stretch the cords and cables too hard they
may get damaged.
When bounding the cords and cables, be sure to loosen them a little. If
they get pulled hard they may come off from the connectors/plugs as you
adjust the screen angle. If you stretch the cords and cables too hard they
may get damaged.
Setup 7: Turn on the display and
computer
1
Make sure that the 1 (power) Indicator blinks red. At
the time of your purchase, the MAIN POWER switch
is set to the \ side.
the time of your purchase, the MAIN POWER switch
is set to the \ side.
Note
When the MAIN POWER switch on the right side of your display is not
set to the \ side, press the \ side and check that the 1 (power) indicator
blinks red.
When the MAIN POWER switch on the right side of your display is not
set to the \ side, press the \ side and check that the 1 (power) indicator
blinks red.
2
Press the 1 (power) switch located on the front
right of the display.
The 1 (power) indicator lights up in green.
right of the display.
The 1 (power) indicator lights up in green.
3
Turn on the computer.
to AC IN
to a power outlet
power cord (supplied)
1
2
MAIN POWER
lights in red
lights in green