Panasonic BT-4LH310 Manual De Usuario
16
17
On-screen Display
The screen shows the operating status display, main menu (MAIN MENU) / FUNCTION menu / INPUT SELECT menu display, picture
adjustment (PICTURE) menu display, audio volume display, FUNCTION display, audio level meter display, time code (TC) display,
closed caption (CC) display, and other information.
Operating Status Display
SDI1 3840 x 2160 / 60p
: LT
CRCC NO ID
GRAB FULL
D-SEL
ZOOM
FILM
P-P
6
1
2
7
8 9 1011 12 13
5
3
4
<Note>
• The status display state can be set in [STATUS DISPLAY] of
the [SYSTEM CONFIG] menu. (→page 32)
• Icons meeting the 3 to 8 display conditions are displayed
aligned to the left.
• [UNSUPPORT SIGNAL] and [NO SIGNAL] may not be dis-
played properly.
1.
Selected input line (→ page 12, 20)
• Displays [SDI1], [SDI2], [SDI3], [SDI4], [DisplayPort1], [Dis-
playPort2], [HDMI1], [HDMI2], [INT-SG], etc.
2.
Signal format indication
• If [UNSUPPORT SIGNAL] is displayed, an unsupported
signal is being input.
It may also indicate that the format of the input signal differs
from that set in the [INPUT SELECT] menu.
• When [NO SIGNAL] is displayed, a signal is not being input.
3.
Various indications (CRCC error information)
• Displayed when a CRCC error occurred during SDI input.
4.
Various indications (payload ID information)
• Displayed when there was an error with the payload ID dur-
ing SDI input.
• [NOID] is displayed if there is no payload ID and [ID] is dis-
played if the signal format and payload ID do not match.
5.
Various indications (screen selection information)
• Displayed when normal mode and PICTURE ASSIST mode
of SDI QUAD mode.
• Displayed in the status display section of the area selected
in the screen in DISPLAY SELECT.
6.
Various indications (PIXEL TO PIXEL mode)
• Displayed when image display is PIXEL TO PIXEL.
7.
Various indications (ZOOM mode)
• Displayed when using the ZOOM function and also includes
the ZOOM target position.
8.
Various indications (FILM mode)
• Displayed when [GAMMA SELECT] in the [VIDEO CONFIG]
menu is set to [FILM].
9.
Various indications (lock setting)
• Displayed when front panel operation is locked. (→page 48)
10.
Various indications (audio mute indication)
• Displayed when the speaker and headphones are muted.
(→page 21)
11.
Various indications (picture adjustment change indica-
tion)
• Indicates that picture adjustments ([PEAKING]/[PHASE]/
[CHROMA]/[BRIGHT]/[CONTRAST]/[BACKLIGHT]) have
been changed from the values confirmed in [SETUP LOAD]
or [POWER ON SETUP]. (→page 21)
12.
Various indications (FRAME GRAB function)
• Displayed when the FRAME GRAB function is operating
and a still image is displayed. (→page 43)
13.
Various indications (quantization range to apply to
input signal)
• Displayed when [RANGE] in the [SYSTEM CONFIG] menu
is set to [FULL] or [LIMITED]. (→page 31)
Main Menu (MAIN MENU)/FUNCTION Menu/INPUT SELECT Menu Display
1.
Press <MENU> when no menu is displayed.
• [TOP MENU] appears.
MENU EXIT
TOP MENU
MAIN MENU
FUNCTION
INPUT SELECT
INPUT SELECT