Panasonic BT-4LH310 Manual De Usuario
36
37
Main Menu
(Continued)
*
1
The settings are canceled when the power is turned OFF.
*
2
If these settings are changed, the menu settings will also change.
*
3
The control settings are not available during GPI operation.
*
5
High gradation portions are clipped. The backlight and contrast cannot be adjusted.
FUNCTION
The underlined values are the factory defaults.
Submenu
Setting
Description
FUNCTION1 to
FUNCTION5
BLUE ONLY
GAMMA SELECT
WHITE BALANCE
MONO
BLACK MODE
R COLOR
G COLOR
B COLOR
SDI DISPLAY MODE
ZOOM MODE
ZOOM POSITION
PIXEL TO PIXEL
FRAME GRAB
DISPLAY SELECT
MULTI FUNCTION
PICTURE ASSIST
WFM LINE SELECT
AUDIO MUTE
LEVEL METER
TIME CODE
CLOSED CAPTION
MARKER
FRAME MARKER
OUTER LINE MARKER
CROSS HATCH
FOCUS-IN-RED
Y MAP
ZEBRA
ZEBRA LEVEL
SCREEN SAVER
LUT
UNDEF
(Factory defaults
FUNCTION1:
ZOOM MODE
FUNCTION2:
Y MAP
FUNCTION3:
FRAME GRAB
FUNCTION4:
ZEBRA
FUNCTION5:
SDI DISPLAY MODE)
Selects the functions to assign to <FUNCTION1> to <FUNCTION5>
(front panel buttons or [FUNCTION] menu).
[BLUE ONLY]
*
1
Cuts the red and green signals. Use this function to check the phase (PHASE)
and chroma (CHROMA). Each press of the button toggles between ON and
OFF.
[GAMMA SELECT]
*
2
*
3
Selects the gamma curve.
[WHITE BALANCE]
The adjustment screen for [GAIN]/[BIAS] of WHITE BALANCE can only
be accessed when [VAR1] to [VAR3] is selected in [COLOR TEMP.].
[MONO]
*
2
*
3
Switches between color and monochrome.
[BLACK MODE]
*
1
*
5
This mode is for correcting black level errors and checking the gradation of dark
areas.
The brightness of the backlight is reduced and the contrast is increased so that
up to 75 % of the input signal level has the same gamma curve as the [GAMMA
SELECT] setting. The signal level of 75 % or higher is clipped.
[R COLOR]
*
1
Cuts the red signals.
Each press of the button toggles between ON and OFF.
[G COLOR]
*
1
Cuts the green signals.
Each press of the button toggles between ON and OFF.
[B COLOR]
*
1
Cuts the blue signals.
Each press of the button toggles between ON and OFF.
[SDI DISPLAY MODE]
Toggles the SDI screen mode between [SINGLE] and [QUAD].
[ZOOM MODE]
Switches the screen zoom mode for a 4K signal.
[ZOOM POSITION]
Switches the display position for screen zoom mode.
Turns the ZOOM function on or off.
[PIXEL TO PIXEL]
Turns the PIXEL TO PIXEL function on or off.
[FRAME GRAB]
Turns the FRAME GRAB function on or off.
[DISPLAY SELECT]
Selects the target selection screen for QUAD mode.
[MULTI FUNCTION]
Turns the MULTI FUNCTION function on or off.
[PICTURE ASSIST]
*
1
Turns the PICTURE ASSIST function on or off.
[WFM LINE SELECT]
Switches the display mode of WFM.
[AUDIO MUTE]
Turns the audio volume MUTE function on or off.
[LEVEL METER]
*
2
Turns the audio level meter display on or off.