Panasonic E50 Manual De Usuario
75
Troubleshooting guide (continued)
Play
Remote control
Play fails to start even when [
1
]
(21)
is pressed.
Play starts but then stops
immediately.
“NO READ”, “UN SUPPORT”,
“NO DISC” or “NO PLAY” appears
on the unit’s display.
immediately.
“NO READ”, “UN SUPPORT”,
“NO DISC” or “NO PLAY” appears
on the unit’s display.
≥
Insert the disc correctly with the label facing up. (page 20)
≥
This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Video, Video CD, CD and MP3
disc. (page 10)
disc. (page 10)
≥
The disc is dirty. Clean it. (page 69)
≥
The disc may be badly scratched. (page 69)
≥
You inserted a blank DVD-RAM or DVD-R.
No response when buttons
pressed.
pressed.
≥
If “
” appears on the television,
the operation is prohibited by the unit or disc.
≥
If the unit is not operating at all, press [
, TIMER]
(12)
to switch the unit to standby, then press
[
, TIMER]
(12)
again to turn the unit on. The unit may not be operating correctly due to
lightning, static electricity, or some other external factor.
≥
The Child Lock function is activated. (page 54)
A title or chapter doesn’t play
when it is selected.
when it is selected.
≥
Some titles and chapters on DVD-Video are not played when you have changed the ratings
level. (page 62)
level. (page 62)
Picture distorted during search.
≥
Some distortion is normal.
Alternative soundtrack and
subtitles cannot be selected.
subtitles cannot be selected.
≥
The languages are not recorded on the disc.
≥
You may have to use the disc’s menus to select languages.
Soundtrack/subtitle language not
the one selected with the SETUP
menus.
the one selected with the SETUP
menus.
≥
The language is not recorded on the disc. (page 59)
No subtitles.
≥
Subtitles are not recorded on the disc.
≥
Turn the subtitles on. (page 51)
Angle cannot be changed.
≥
This function depends on software availability. Angles can only be changed during scenes where
different angles are recorded (“
” appears on the display).
You have forgotten your ratings
password.
password.
≥
Return the unit's settings to the initial state (factory setting).
With the tray open, keep pressing [
With the tray open, keep pressing [
:
/
6
] and [
5
/
9
]
(45)
on the main unit
simultaneously for 5 or more seconds.
The remote control doesn’t work.
≥
The unit is on standby to make a timer recording (“
” on the unit’s display is on). (page 32)
≥
[DVD, TV]
(15)
is not switched to “DVD”.
Switch to “DVD” when operating this unit. (page 8)
≥
The remote control code is wrong.
Change to the correct code. (page 63)
Change to the correct code. (page 63)
≥
The batteries are depleted. Replace them with new ones. (page 8)
≥
Point the remote control at the remote control sensor on the main unit. (page 8)
≥
Remove obstacles from between the remote control and main unit.
≥
The Child Lock function is activated. (page 54)
Cannot operate the television.
≥
The remote control code is wrong.
Change to the correct code. Some televisions cannot be operated even if you change the code.
(page 9)
Change to the correct code. Some televisions cannot be operated even if you change the code.
(page 9)
≥
[DVD, TV]
(15)
is not switched to “TV”.
Switch to “TV” when operating the television. (page 9)
B.book 75 ページ ２００３年２月４日 火曜日 午後２時５０分