Philips S1D13505 Manual De Usuario
Epson Research and Development
Page 13
Vancouver Design Center
Interfacing to the NEC V832™ Microprocessor
S1D13505
Issue Date: 01/02/05
X23A-G-012-02
4.2 S1D13505 Hardware Configuration
The S1D13505 latches MD15 through MD0 to allow selection of the bus mode and other
configuration data on the rising edge of RESET#. For details on configuration, refer to the
S1D13505 Hardware Functional Specification, document number X23A-A-001-xx.
configuration data on the rising edge of RESET#. For details on configuration, refer to the
S1D13505 Hardware Functional Specification, document number X23A-A-001-xx.
The table below shows those configuration settings relevant to the PC Card host bus
interface used by the NEC V832 microprocessor.
interface used by the NEC V832 microprocessor.
Table 4-1: Summary of Power-On/Reset Options
S1D13505
Pin Name
Value on this pin at rising edge of RESET# is used to configure: (1/0)
1
0
MD0
8-bit host bus interface
16-bit host bus interface
MD[3:1]
111 = PC Card host bus interface
MD4
Little Endian
Big Endian
MD5
WAIT# is active high (1 = insert wait state)
WAIT# is active low (0 = insert wait state)
MD11
Alternate Host Bus Interface Selected
Primary Host Bus Interface Selected
MD12
BUSCLK input divided by two
BUSCLK input not divided by two
= configuration for NEC V832 microprocessor