Seagate ST150176LW/LC Manual De Usuario
32
Barracuda 50 Installation Guide, Rev. A
2.
Configure termination.
ST150176LC drives are designed for installation in host sys-
tems that have a backplane with single connector attach-
ment (SCA) connections. Termination is normally provided
on this backplane. Check your host system documentation
for details.
tems that have a backplane with single connector attach-
ment (SCA) connections. Termination is normally provided
on this backplane. Check your host system documentation
for details.
Note. Host systems designed to use ST150176LC drives nor-
mally provide termination power from the host adapter or
other source. ST150176LC drives cannot be configured
to provide termination power to the bus.
other source. ST150176LC drives cannot be configured
to provide termination power to the bus.
• You can use this drive in host systems that do
not have a backplane with SCA connectors by
using a SCA to wide SCSI-2 adapter. These
using a SCA to wide SCSI-2 adapter. These
adapters separate the interface lines from the power lines. If
you use such an adapter, proceed with step 2 of the installa-
tion instructions provided for ST150176LW drives.
you use such an adapter, proceed with step 2 of the installa-
tion instructions provided for ST150176LW drives.