Seagate ST15230W/WD/WC Manual De Usuario

32              Hawk 4 (Wide) Family Install Guide, Rev. A

___________________________________________

*Drive ID on SCSI Bus. The drive ID is

binary coded positionwise i.e., jumper in
position A

3

 is drive ID 8, in position A

2

 is

drive ID 4, in position A

1

 is ID 2, position A

0

is  ID 1 and no jumpers is ID 0. Default is
ID = 0.

Either J1-auxiliary or J6 may be used to
select drive ID. Both should not be used at
the same time, because at some future
time when the ID is changed the user could
fail to configure both J1-auxiliary and  J6
the same.  Default  is ID = 0.

Connection for optional external Drive
Busy indicator.

*See notes on page 27, 28 and 29