Seagate ST32430N/ND Manual De Usuario
Hawk 2LP Family Installation Guide, Rev. B 27
______________________________________________________________________________________________________________
J2 continued from previous page
PE
On
On
Parity checking and parity error reporting by the
drive is enabled.
drive is enabled.
Off
Drive does not report result of parity checking to
host. Default is a PE jumper installed.
host. Default is a PE jumper installed.
SS
Off/On
Off/On
Reserved. Default is no jumper installed.
TP TP
Off Off
Off Off
No terminator power is connected to drive termi-
nators or SCSI bus I/O pin 26.
nators or SCSI bus I/O pin 26.
On Off
Drive supplies its own terminator power only.
Jumper on this position is factory default for "N"
models only.
Jumper on this position is factory default for "N"
models only.
Off On
Drive supplies power to I/O pin 26 of SCSI bus;
none to internal terminators. When drives have
differential I/O circuits, a jumper on the right TP
position may be needed to power external termi-
nators (see system documentation). The "ND"
model drives have differential I/O circuits which
have no terminator circuits on the drive.
none to internal terminators. When drives have
differential I/O circuits, a jumper on the right TP
position may be needed to power external termi-
nators (see system documentation). The "ND"
model drives have differential I/O circuits which
have no terminator circuits on the drive.
On On
Drive supplies terminator power to itself (internal
connection) and to I/O pin 26 of SCSI bus. This
is a legal jumper setting.
connection) and to I/O pin 26 of SCSI bus. This
is a legal jumper setting.