Seagate ST32000641AS Manual De Usuario

Descargar
Página de 42
Barracuda XT Series SATA Product Manual, Rev. C 
  15
2.12
Environmental protection
Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting 
certain chemical substances.
2.12.1
European Union Restriction of Hazardous Substances (RoHS) Directive
The European Union Restriction of Hazardous Substances (RoHS) Directive, restricts the presence of chemical sub-
stances, including Lead, Cadmium, Mercury, Hexavalent Chromium, PBB and PBDE, in electronic products, effective July 
2006. This drive is manufactured with components and materials that comply with the RoHS Directive.
2.12.2
China Restriction of Hazardous Substances (RoHS) Directive  中国限制危险物品的指令
This product has an Environmental Protection Use Period (EPUP) of 20 years. The following table contains 
information mandated by China's "Marking Requirements for Control of Pollution Caused by Electronic 
Information Products" Standard.
"O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower than the 
threshold defined by the China RoHS MCV Standard.
"X" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is over the thresh-
old defined by the China RoHS MCV Standard. 
2.13
Corrosive environment
Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light indus-
trial environments containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM B845. However, this 
accelerated testing cannot duplicate every potential application environment. Users should use caution exposing any 
electronic components to uncontrolled chemical pollutants and corrosive chemicals as electronic drive component reliabil-
ity can be affected by the installation environment. The silver, copper, nickel and gold films used in Seagate products are 
especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damag-
ing. In addition, electronic components should never be exposed to condensing water on the surface of the printed circuit 
board assembly (PCBA) or exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrica-
tion, such as vulcanized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life 
of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives.
O
表示该部件(于同类物品程度上)所含的危险和有毒物质低于中国RoHS MCV标准所定义的门槛值。
 
X
表示该部件(于同类物品程度上)所含的危险和有毒物质超出中国RoHS MCV标准所定义的门槛值。